eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna parts, accessories, incl. baluns, hardware, etc. | CWS ByteMark HBH50 1:1 Balun Transformer Help


Reviews Summary for CWS ByteMark HBH50 1:1 Balun Transformer
Reviews: 2 Average rating: 2.5/5 MSRP: $49.95
Description: W2FMI (Jerry Sevick) High Power 1:1 Balun Design in an aluminum box with ceramic standoffs at the output and UHF connector input.
Product is in production.
More info: http://www.cwsbytemark.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the CWS ByteMark HBH50 1:1 Balun Transformer.

K6ZL Rating: 2/5 Nov 25, 2005 14:07 Send this review to a friend
Bad Quality Control  Time owned: 0 to 3 months
I agree with KE9UW. His review prompted me to inspect both my HBH50 baluns. As with his, my units has solder lugs that would not "tin". Replacing the lugs effectively repaired the baluns. So, buyer be aware!
 
KE9UW Rating: 3/5 Jan 21, 2005 18:26 Send this review to a friend
Well engineered, poor soldering  Time owned: 0 to 3 months
I like this company, but this balun came with very poor soldering inside. The engineering and design is very good...excellent...however whoever soldered the leads of the balun needs some help. One lead inside the box was not soldered at all...soldering was attempted, but the wire was loose on the solder lug. I had to peel off blobs of RTV (all over the solder connections for some reason) and replace the lugs with lugs that were solderable. Took about 1/2 hour.
I recommend this product, but you must take the cover off and inspect (and possibly repair) the sloppy soldering workmanship. The toroid winding was done well, leads tinned, and generally constructed very well.
Chuck, KE9UW
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.