eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Receivers: Commercial/Military/Marine adaptable to ham use | Rockwell Collins HF-2050 Help


Reviews Summary for Rockwell Collins HF-2050
Rockwell Collins HF-2050 Reviews: 1 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: First high performance commercial-military receiver to use DSP. Built in limited numbers for the Canadian military.
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Rockwell Collins HF-2050.

KD5VC Rating: 5/5 Feb 3, 2005 15:16 Send this review to a friend
Great Receiver  Time owned: 0 to 3 months
This receiver is really as good as you have heard. The audio recovery is about as good as you are going to find, the AGC works well without pops and clicks. The noise blanker does work well on impulse noise. The front end of this receiver is very quiet and sensitivity is very high, with the MDS measuring in the .02 to .03 uv range. The controls are easy to use, although there are a couple of buttons marked with features that were not operational in the final design. Backlighting for the display would have been nice, but the displays are fairly large and easy to read. The receiver has built in test functions that can be exhaustive. On power up you get a quick test of the parameters, there is a "Test" button which allows you to test "everything". The receiver can be remote controlled, though I do not know of a software package that supports it.

There is one design requirement that has not been observed on some of these receivers causing questions about their reliability. The power supply in the HF-2050 must be mounted hard up against the top cover. This design uses the top cover as a heat sink. If there is space between the top cover and power supply the power supply will run extremely hot causing failure of power supply components (electrolytic caps first). The vent holes on the top of the receiver are pretty well blocked by the power supply, so you can not move enough air into and out of the power supply compartment to cool the power supply by direct air flow. It must be cooled by conducting heat to the top cover. Then you need to insure that air is flowing across the power supply area of the top cover.

These receivers worked for years for the Canadian military with acceptable MTBF. They will do the same for the new owners.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.