eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna Tuners | Elecraft T1-FT817 Adapter (T1 ATU to Yaesu FT-817 transceiver) Help


Reviews Summary for Elecraft T1-FT817 Adapter (T1 ATU to Yaesu FT-817 transceiver)
Elecraft T1-FT817 Adapter (T1 ATU to Yaesu FT-817 transceiver) Reviews: 5 Average rating: 5.0/5 MSRP: $49
Description: This "smart" adapter cable allows the Elecraft T1 antenna tuner to track band
changes from a Yaesu FT-817 transceiver. Changing bands at the rig wakes
up the T1 and recalls the last-used L-C settings on this band, without the
need to transmit.

This method of re-tuning the ATU results in less QRM on the bands, and is
much more convenient than having to transmit on each band change, as is
required with other tuners.

The adapter is available only pre-assembled, not as a kit.

The T1-FT817 adapter cable incorporates a small microcontroller (MCU)
inside the mini-DIN connector at the transceiver end. This MCU monitors the
band-data voltage at the rig's ACC/CAT jack, and converts the data to digital
form for the antenna tuner. The MCU draws an extremely small amount of
current from the FT-817's battery or power supply: just 330 microamps when
the rig is turned on, and 70 microamps when it's turned off.

The adapter cable is 18" long and well-shielded to protect against RFI.

Product is in production.
More info: http://www.elecraft.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Elecraft T1-FT817 Adapter (T1 ATU to Yaesu FT-817 transceiver).

M3XEK Rating: 5/5 Aug 14, 2007 14:32 Send this review to a friend
elecraft t1  Time owned: 0 to 3 months
Just got my t1 and ft817 lead today and I have run around the house tuning stuff like the table, chairs, the 6m rubber duck that came with the ft817 (tunes perfect on 20m) and I cant fault it!
It gets a better match than my mfj and lake tuners and the link cable means it only does it once with my loft 20m dipole that is my main antenna- it tunes it to all bands down to 80 with perfect swr.
I can recommend this setup to everyone.
As for the comments about the case and build quality, that I thankfully ignored, I think that it is fine; not a metal box you can drive a tractor over, but its small enough to fit your shirt pocket safe out of the way of tractors!
 
K2TA Rating: 5/5 Apr 26, 2006 07:07 Send this review to a friend
It works.  Time owned: 0 to 3 months
I cut the mini-plug off of the end that plugs into the T1 and built the T1 into the FT-817 with the T1-FT817 providing band change information to the T1.

http://www.k2ta.com/t1_internal1.jpg

The thing works as advertised. What more can you ask for?
 
MM3XDS Rating: 5/5 Aug 12, 2005 11:45 Send this review to a friend
Easy and No Fuss  Time owned: 3 to 6 months
1 Instruction Sheet,1 Ready Made Cable,Follow Instructions,and it does what it says,Tunes the FT-817 without a hitch.

Ready Built, so no brain power required

Highly Recommended

Donald Suttie
Dundee
Scotland
MM3XDS /2M0XDS
http://www.rockwellcm.pwp.blueyonder.co.uk/
 
W4JZ Rating: 5/5 Mar 18, 2005 08:15 Send this review to a friend
Real Nice  Time owned: 0 to 3 months
I have used the T1 with the little FT-817 control cable for a week now. It really makes tuning a snap if you band hop like I do.

If you have an Yaesu FT-817 you will want the Remote Control Adaptor cable! Changing bands will hold setting in memory so when switching back T1 will return to the previous settings. Real nice!


Reed
 
QRP817 Rating: 5/5 Mar 9, 2005 11:50 Send this review to a friend
Works as advertised!  Time owned: 0 to 3 months
I wrote a longer review of Elecraft's T1 autotuner elsewhere here, but want to add that the accessory cable to interface with the FT-817 works well. Once you've autotuned on all bands you intend to use with a particular antenna, using the T1 and the 817, each time you change bands, the tuner automatically reconfigures itself from its memory with no further effort. That's sweet. The cable plugs into the side of the T1 and connects to the FT-817's accessory port. Devices like this can definitely spoil a ham ....
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.