- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna parts, accessories, incl. baluns, hardware, etc. | DX Engineering Super Duty Saddle Clamps Help

Reviews Summary for DX Engineering Super Duty Saddle Clamps
DX Engineering Super Duty Saddle Clamps Reviews: 5 Average rating: 5.0/5 MSRP: $29.00+
Description: Super Duty Saddle Clamps are designed for applications where maximum torque is needed to control large or unbalanced antenna arrays or for other applications where other torque control products have proven inadequate. These Super Duty Saddle Clamps are made in sizes that fit the Outside Diameter of the aluminum and steel tubing used in antenna construction. The Saddles are cast with high- strength A356-T6 aluminum, which also has superior anti-corrosion properties, to grip the tubing securely.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the DX Engineering Super Duty Saddle Clamps.

AB4D Rating: 5/5 Jan 21, 2013 14:25 Send this review to a friend
A Super Product  Time owned: 3 to 6 months

I recently used the DXE-SAD-300B Saddle Clamps and DXE-SDS-200P Super Duty Clamps, and a DXE-BMP-3C boom to mast plate to strengthen a M2 Model 40M4LLDD, 40 Meter Monobander.

The manufacturer supplied parts proved inadequate and failed during the installation. The DX Engineering parts are just what I needed to install the antenna. The parts fit perfectly, and substantially increased the strength of the installation. The antenna weighs 140 pounds, the clamps easily handle that load.

If you need heavy duty clamps. IMO, the ones offered by DX Engineering are the best available, and far exceed the muffler style clamps used by many antenna manufacturers.


K7ULS Rating: 5/5 May 7, 2012 16:51 Send this review to a friend
Great clamps  Time owned: 0 to 3 months
Just got the DXE-SAD-200B Saddle Clamps and DXE-SDS-200P Super Duty Clamps along with a DXE-BMP-2B boom to mast plate to really beef up my 6M7 yagi installation for the summer E season here at 9000' Powder Mtn.

The weather can really be unpredictable and that's why I rely on DX-Engineering.
VE7RF Rating: 5/5 Jan 3, 2012 05:58 Send this review to a friend
Best saddle clamp made, bar none....period.  Time owned: more than 12 months
Standard "muffler clamps" and even DX engineering's "U bolt saddle clamps" can't compare to these SUPER duty saddle clamps. They come in ONLY 3 x size's....2"-2.5"-3" These will NOT slip on any mast! The reason is obvious. These have a HUGE surface area on BOTH halves of the clamp assy. BOTH halves of the assy use a TEXTURED finish on the inside, that bears down on the mast [or boom]. A pair of G-8 armour plated bolts + a 1/4" thick SS backing plate + nuts + washers complete the assy. I use 'marine grade never seize' [made by the loctite co], on the threads.

I make my own version of the infamous F-12 boom to mast double plates, using a 8" wide x 14" tall 6061-T6 plate [3/8" thick for BOTH plates] for the vertical plate..and either a 8" tall by 14"/17" wide plate for the horizontal plate. I then use THREE of these super duty saddle clamps to mount the vertical plate to the mast.[ 2 above the boom, and one below the boom]. just make sure the mast is clean, and free of debris+ grease etc..and ditto with the textured inner portion of the super duty saddle clamp.

You can also use them on a boom if you want, but DX engineering regular saddle clamps work just fine for that application.

I also use these super duty saddle clamps for MAST steps. My mast steps consist of 2" x 2" x 14" long angle aluminum. [1/4" thick-6061-T6]. I apply that 2" wide non skid stuff to both the horizontal and vertical surfaces, so neither my hands nor feet will slip,esp in the rain! 1/4-20 SS bolts and SS nylocks stick up at each end, so I can feel where the ends of the steps are..with my boots.

The 2" super duty mast clamp just happens to be 2" tall..and mates with the 2" x 2" angle steps perfectly. These will not rotate on their axis, nor slide down, nor twist.

I also use the 3" version of the super duty saddle clamp on the Horizontal plate, to mount the 3" BOOM of my F-12 340N yagi.

Standard muffler style clamps have zero surface area, regardless of whether 3/8" or even 1/2" U bolts are used. [they all have only 1/16" bearing down on the mast]. These super clamps have almost 340 degs of clamping area x 2" tall [for a 2" clamp, and even more vertical height on the larger 2.5 and 3" clamps]

I buy these super duty clamps by the case load....and so should you. The single plate set up, using muffler clamps is a pita to install. The double plate scheme, using DX eng super clamps is the real ticket, bullet proof.

later..... Jim VE7RF
K8JHR Rating: 5/5 Sep 16, 2011 18:40 Send this review to a friend
Wonderful !  Time owned: more than 12 months
These heavy duty element saddle clamps are just great - I have used them in various antenna projects, most recently a 20 meter rotatable dipole. They are just perfect for the job. Excellent and made design and installation quick and easy. I will be buying more of these for sure.

--- James -K8JHR ----
K4ZA Rating: 5/5 May 25, 2009 15:39 Send this review to a friend
Excellent!  Time owned: more than 12 months
These saddle clamps are the solution to things slipping on the mast! The clamps do grip the mast (or boom), & their wrap-around design provide much greater surface area than the common muffler clamp style you often encounter.

I use & recommend them. They've made the difference between success & failure on such large antenna project as: 80M rotary dipoles, the MonstIR, 40M Yagis, & so on. They work~!

Don K4ZA
Tower Works
Charlotte NC

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.