eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


Reviews Categories | QRP Radios | Digimit 2002 Help


Reviews Summary for Digimit 2002
Digimit 2002 Reviews: 0 Average rating: (no reviews) MSRP: $some 350.ooEuro
Description: The Microtelecom Digimit 2002 transmitter exploits 'state of the art' digital modulation and synthesis from microphone up to RF.Featuring an all digital design thought for radio amateurs and equipped with a 100% duty cycle 10Wpep RF power amplifier, the Digimit 2002 transmitter offers top class performances to QRP enthusiasts at a very reasonable cost. The Digimit 2002 is based on Gate Array Signal Processing! The HF SSB/CW signal is digitally synthesized in a single programmable logic IC.There are no balanced modulators to trim, no ripply cristal filters, no VCOs to adjust, no PLLs to lock: you may expect that the Digimit 2002 transmitter will mantain its high performance unchanged for a life time. Frequency coverage1.6-2.0, 3.5-4.0, 7.0-7.3, 10.0-10.2, 14.0-14.5,18.0-18.2, 21.0-21.6, 24.8-25.0, 28.0-28.8 MHz (see note 1)Modes of operation: Single sideband suppressed carrier (USB/LSB), CW, TUNE (with internal two tone generator)Tuning steps 1 Hz, 10 Hz, 100 Hz, 1 KHzFrequency accuracy +/- 2 ppm typ. (+/- 60 Hz at +25°C after cold start)Frequency stability +/- 10 ppm typ. (-10°C / + 60°C)Power requirements + 13.8 VDC, negative ground, built-in reverse polarity protectionCurrent consumption 0.8 A Stand by, 2.2 A SSB (10W pep output), 3.5 A CW (10 W output)Transmit duty cycle 100 % (SWR < 2:1, T < 40 °C)Output Power 10, 5, 2, 1, 0.5, 0.2, 0.1 Wpep (SSB/TUNE), 10, 5, 2, 1, 0.5, 0.2, 0.1 W (CW)Antenna impedance 50 OhmLoad tolerance 2:1 or better SWR recommendedCarrier suppression Better than 70 dBUnwanted sideband suppression Better than 70 dBSpurious emissions Better than -60 dBcHarmonic emissions Better than -50 dBcAudio frequency response -0.5 dB (300 - 2700 Hz), phase linear, > -70 dB (0 - 3000 Hz)Audio input impedance 10 KOhmAudio A/D converter 1-bit, 6 Msps sigma deltaRF D/A converter 14-bit, 90 MspsCW keyer Automatic "non-iambic" mode (Manual/external keyer supported), semi break-inCW keyer speed from 10 to 50 WPMSize 6.2 H x 16.5 W x 18.5 D cm (Cabinet) 6.2 H x 16.5 W x 22.0 D cm (Overall)Weight 980 gNote: 1. The Digimit 2002 covers the entire HF range, from 1 MHz up to 30 MHz. Performances are granted only on amateur bandlimits.
More info: http://www.microtelecom.it/digimit/techart.htm

There are no reviews for the Digimit 2002.
Be the first to write a review for the Digimit 2002!

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.