eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Emergency/Portable Power: generators, solar, wind, thermal, etc | CirKits SCC3 Solar Charge Controller Kit Help


Reviews Summary for CirKits SCC3 Solar Charge Controller Kit
Reviews: 3 Average rating: 5.0/5 MSRP: $50
Description: The SCC3 kit is the heart of a 12 Volt solar power system, it regulates the charging of batteries from photovoltaic (PV) solar panels. Regulated charging greatly extends the life of rechargeable batteries when compared to systems with a direct PV-battery connection.

Product is in production.
More info: http://www.cirkits.com/scc3/
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the CirKits SCC3 Solar Charge Controller Kit.

LA2RRA Rating: 5/5 Feb 25, 2013 16:10 Send this review to a friend
Vry nice  Time owned: 0 to 3 months
Put it together and works without any qrm...i ordered one more.Thanks Cirkit i tell my friends about you :-)

73 de la2rra
 
K5BDM Rating: 5/5 Oct 11, 2009 07:09 Send this review to a friend
Great kit! fits the need  Time owned: 0 to 3 months
I bought this kit for all of the reasons stated in the design goals of the seller. "efficiency, simplicity, reliability and the use of field replaceable parts."
The kit was an easy build. No surface mount parts!!
The 25 turn setting resistor provides precision setting of the float voltage. You can set for lead acid at 14.5 V or adjust setting for Gel cell at 13.8 V. This is an excellent well thought out kit and I will be buying a few more for other projects outside of ham radio.

I considered lower cost off the shelf solutions but chose this for its capability and repair using off the shelf easy to install parts.

If you are going solar and do your own electronic repair then this kit is the solution.

K5BDM
 
NV0U Rating: 5/5 Dec 25, 2005 07:53 Send this review to a friend
Neat and useful little kit  Time owned: 3 to 6 months
This is a pretty fast building little solar charge controller kit. I had it together in about 2 hours, and then spent the next few days getting it adjusted as I had to make the adjustments while it was charging some pretty flat batteries. Adjustment is super simple - just turn the muliturn pot so the light turns green at the cut off voltage.

I did have some issues with the build instructions though - the large parts get put on first, then the components have to be wedged in between them. I don't have the proverbial fat fingers, but even I had problems to get some of the parts in. Hopefully the build instructions will be changed to do it the other way! Other than this one small complaint, the build went smoothly.

The controller has been perking away without issue for the past few months. It does a really nice job of going into sleep mode when the sun goes down, and waking up and charging the batteries when it comes back up again.

It also creates no noticable QRM when it is charging.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.