eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Receivers: General Coverage | Yaesu FRG-7000 Help


Reviews Summary for Yaesu FRG-7000
Yaesu FRG-7000 Reviews: 3 Average rating: 4.0/5 MSRP: $655
Description: General coverage communications receiver, circa 1977-1980. Replaced the famous FRG-7. Triple conversion receiver covering 250kHz-29.999MHz.
Product is not in production.
More info: http://www.dxing.com/rx/frg7000.htm
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Yaesu FRG-7000.

K2OWK Rating: 4/5 Jan 6, 2010 20:00 Send this review to a friend
Excellent HAM or SWL receiver  Time owned: 0 to 3 months
I picked up this receiver off EBay for a good price. I have been out of ham radio for more then 50 years and decided to get back in. The receiver is very sensitive and tunes SSB signals perfectly. It is great and requires moving many dials, as I love to do. I will be installing a good antenna in the next few days and that should make this great receiver an excellent one. The only problem I encountered was the very slight noise generated by the digital desplay, just a very minor problem. The accuracy of the display is excellent just about dead on. I would recommend this receiver to anyone getting into ham radio or shortwave listining.
 
ERIEDXER Rating: 4/5 Oct 28, 2009 12:13 Send this review to a friend
Fun and decent classic  Time owned: more than 12 months
If you take in to account that this is a classic receiver that requires moving some preselector knobs to tune, it is a lot of fun to operate. There is the slightly noticeable digital readout noise in the audio, but as far as performance I have found it to be right on par side to side with an FRG-7 on all the bands. When I'm away from my tube gear I find myself playing with this SS receiver almost as much as my Drake R7.
 
G4SOX Rating: 4/5 Jun 15, 2008 07:28 Send this review to a friend
User review of Yaesu FRG-7000 General Coverage Receiver  Time owned: 0 to 3 months
Surprised that no reviews of this unit have been posted before!

Just purchased one of these receivers a month ago and here are some of my opinions. Described on a review site as an FRG-7 with a digital readout but lacking performance. Indeed the unit is very similar to the FRG-7 'Barlow-Wadley' design but apart from the digital readout has some differences in the IF design in addition to the narrow filter for SSB/CW lacking in the FRG-7. It also has a crystal controlled BFO which addresses the drift problem so often bemoaned by FRG-7 users. The physical appearance is also different it has a dark brown case/front panel & knobs. There are lots of coloured indicator lamps for the pre-selector band switch and for the inbuilt timer functions. The frequency display consists of a large clear five segment red readout the first two digits indicating the mhz range and the last three digits indicating the khz. The timer consists of a smaller 6 digit readout indicating local/time/GMT/swich on etc. and there are several switches to control the timer functions.
On my unit the pre-selector and mhz setting controls are 'lumpy' and on my similarly aged FRG-7 these controls are perfectly smooth. Unlike the FRG-7 these capacitors are all 'hidden' in screened enclosures making access impossible without a major strip down of the unit. The main tuning control is smooth but lacks the 'sophisticated' damping system of the FRG-7 (a felt ring behind the knob). The placement of the fine tune control is awful, the control is very stiff and only a small distance away from the the main tuning knob and the on/off switch.
In my opinion, but lacking test gear, the unit performs better than the FRG-7, the AM filter is the same 'barn door' as the FRG-7 but SSB filter is excellent not the best shape factor but it does it's job and the audio is excellent. Sensitivity is better and, as long as the attenuator is used on the lower frequencies, overload is about the same. If the unit is left connected to the mains but switched off the transformer/rectifiers/voltage stabilisers and timer circuits are on 24/7. So if someone has used the unit in this way these components will have a few hours clocked up after 30 years.
The real problem with the unit is the bleed through into the audio circuits of noise from the digital display. It's a sort of burbling sound at a fairly low level. You can switch the display off though and it goes. Presumably this was to allow outboard DC operation but I cannot find out any details on how to implement this so if anyone has these details and the other Gilfer mods please get in touch.
Overall I like the unit for it's retro looks and resonable performance. Paul.

 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.