|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
| Reviews Summary for Behringer DSP-110 Compressor/Limiter and noisegate |
|
Reviews: 3
|
Average rating: 5.0/5
|
MSRP: $$99.95
|
|
Description: An all-round problem-solver combines a ULN mic/line preamp with a variety of useful signal processing options, including our renowned FEEDBACK DESTROYER circuitry, a delay line for speaker time-alignment, an effective yet easy-to-use compressor and a noise gate with LEARN mode. Switchable +48 V phantom power, 24-bit A/D and D/A converters and professional connectivity round out the package and add to the SHARK's ability to adapt to just about any application. Get a five-pack and rack-mount them in just over one space.
|
|
More info: http://www.behringer.com/DSP110/index.cfm?lang=ENG
|
|
Email Subscription
You are not subscribed to this review.
Subscribe!
My Subscriptions
Subscriptions Help
|
You can
write your own review of the Behringer DSP-110 Compressor/Limiter and noisegate.
|
YO3IBW
|
Rating: 5/5
|
May 9, 2009 15:19
|
Send this review to a friend
|
|
Nice Sharky
|
Time owned: 0 to 3 months
|
What can I say about this new product from Behringer... The Shark DSP 110 it's a great mic preamp, a wonderful noise-gate with good learning feature also the compressor is doing a great job. If this little "fish" had also a graphic EQ, it would been a complete solution for ham radio high quality modulation.
73's from YO3IBW Dan
|
|
W3OZ
|
Rating: 5/5
|
Feb 17, 2009 11:38
|
Send this review to a friend
|
|
Good audio on the cheap
|
Time owned: 0 to 3 months
|
I have only had this little box for one day so I will not comment on it’s reliability, I can do that later. I have played with it quite a bit now and tested all the functions I am going to use on daily basis. Many hams want to put a better microphone on their rig and add just a little polish to their audio. This cheap little box may be your answer. There is a built in pre-amp with a clipping feature. That is a very handy way of stopping over driving the mic.
With today’s new rigs we already have the ability to set our audio up with built in EQs. Now with the DSP110, we can go a little farther with just a little more cash. Usually around $70.00. One of the most asked questions I get all the time is how do I get the mic gain correct and not transmit all the noise of my shack including my amp? This device will allow you to eliminate the background noise and determine a cut off point either automatically or manually. It also has a low cut filter that will make it possible to get rid of the low rumble that many hams have, because of things like acoustic vibrations on microphones and rumble caused by other devices in the shack. There is also a compressor, a feedback destroyer, and a limited FX devices. I would not recommend FX (delay) feature for hammy radio.
The manual, like all Behringer manuals, sucks. But just take it out and hook it up as described and play with it into a dummy load and you will find out how it works very quickly.
|
|
W4LGH
|
Rating: 5/5
|
Apr 7, 2006 19:24
|
Send this review to a friend
|
|
Super Box! Very smooth Noisegate
|
Time owned: 0 to 3 months
|
|
This is a GREAT piece of gear for your shack. Its a compressor, a limiter and a digital noisegate. Keeps audio levels the same, and the noisegate kills background noise. Retails for $99 but you can find it on line for about $70!!
|
|
If you have any questions, problems, or suggestions about Reviews,
please email your Reviews Manager.
|
|
|
