- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Ham Repeaters | Motorola MTR2000 Help

Reviews Summary for Motorola MTR2000
Motorola MTR2000 Reviews: 5 Average rating: 5.0/5 MSRP: $7,000 - 10,000
Description: Commercial VHF/UHF/800 MHZ repeater, 40 and 100 watt models.
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Motorola MTR2000.

W4RYR Rating: 5/5 Sep 6, 2017 15:51 Send this review to a friend
best ham repeater  Time owned: more than 12 months
I now have 3 uhf and yes 3 vhf 100 watt repeaters on the air. The Vhf is the 130 to 150 split. These are very rare. only Florida and Canada used them commercially. If you find one jump on it. These units will perform perfectly for years on the ham band. all parameters are software controlled. Beware of ebay - make sure it is the low VHF range. I have not had to return to the site in 18 months.
G7UZN Rating: 5/5 Jul 21, 2013 11:46 Send this review to a friend
Easy to set up  Time owned: more than 12 months
I have 3 uhf MTR2000's to run GB3OY repeater here in the UK.

They are easy to program and easily interfaced to an external controller.

I use the 4 wire connections for the audio with a simple ID-O-Matic controller. The 2000's are built like tanks and I'm sure will give trouble free service.

GB3NS repeater also consists of an identical setup and GB3EL uses a 2M version with a 38A controller.

If you get the chance to get one....GRAB IT !!!
K6ZRX Rating: 5/5 Feb 7, 2009 20:11 Send this review to a friend
Motorola Quality  Time owned: more than 12 months
These repeaters are designed for commercial and public safety service. They are about 1/3 the cost of a Quantar, and are often used for less critical applications. As ham repeaters they are great. IF you are buying used, the 100 watt VHF high split will not do 2 meters. The 40 watt will. Also the 900 stations will not transmit at 927MHz, however the receivers do 902 fine. There are 3 versions of the MTR, base station, repeater, and receiver. The difference between a base and repeater is the base has a T/R relay. The receiver model is used for voting and monitoring. We have several in ham use, along with many on public safety frequencies. Audio interfacing to some external controllers can be problematic and some I/O functions require a "wildcard" board.
WB6FLY Rating: 5/5 Apr 21, 2007 17:55 Send this review to a friend
Bulletproof  Time owned: more than 12 months
I first became aware of the MTR2000 when I saw an installation for Union Pacific Railroad that had a VHF unit in 100% keyed service. Yes, I mean it was continuously transmitting on an Opticom circuit at 40 watts, 24/7/365, and it was working continuously for two years before I saw it. I now have three VHF units in Amateur Radio service, and two UHF units in service for my employer. I don't think there's a better repeater available for the money, but it ain't cheap! Just be aware that the 100 watt VHF power amplifier is available in two splits, 132-154 and 150-174 MHz, and the high-split PA will NOT tune into the 2m band. This is an all-digital station, and there is nothing to tweak or tinker with, so don't think you can modify the high-split PA to work in 2m. Other than the fact that the modules are not user-repairable (and they are VERY expensive) I would recommend the MTR2000 to anyone. Essentially, you get Quantar quality in a 3U rackmount station. If you decide to purchase an MTR2000, don't forget to include the programming software, control microphone, monitor speaker, and the cables- for an extra $500 or so. You can save money by deleting the wireline control module, and don't buy the 100 watt unit if the 40 watt unit will suffice. The 40 watt PA runs on 14 VDC, and covers the entire 132-174 MHz band, while the 100 watt PA runs on 28 VDC and comes in the two splits, as noted above.
N3IVK Rating: 5/5 Apr 8, 2006 01:25 Send this review to a friend
Great repeater  Time owned: more than 12 months
I have 3 of these units, 2 on UHF and 1 on 800 MHZ and have been awesome. The 444.375 in Madison sees during storm season keydown times ranging sometimes up to 12 hours !

Keep the cooling fans working, and throttle back the power just a hair and you will have a turnkey ham repeater that will be a workhorse for years. I run mine with a Scom 7K controller, and the pair work very well together.

My 100 watt unit runs at about 40 watts, and doesnt miss a beat. With the preselector inline, this unit hasn't had any intermod at all.

Just watch the VHF units, the high split ones will NOT do 2 meter ham.

They are starting to come out on the used market as public safety users goto Apco 25 digital systems.


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.