- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | QRP Accessories | QB-6V Help

Reviews Summary for QB-6V
QB-6V Reviews: 1 Average rating: 5.0/5 MSRP: $$17.50
Description: 6:1 Voltage Balun - 300 ohm Antenna / 50 ohm coax
1 - 55MHz
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the QB-6V.

G8UBJ Rating: 5/5 May 15, 2006 01:24 Send this review to a friend
A great little product by Erickson Engineering  Time owned: 0 to 3 months
I purchased this balun to feed a folded dipole on 6 Meters. My original set up was with a 300 ohm ribbon feed using a matching capacitor.

The folded dipole has good bandwidth characteristics which is what I was looking for.

I use an IC-502 and small amplifier which achieves 10 Watts output on the Thruline, key down thatís maximum continuous power for this balun. I also tested it with my 6M transvertor running 25watts SSB with no adverse effects.

50 MHz is at the top of its range but what a difference this made to Receive and transmit. Not just low SWR across the whole of 6M and a few s points on the local beacon but a good reduction in local QRN.

If you run QRP you have to get everything right. To me QRP means efficient not cheap! These aren't an expensive product and are well worth investing in.

I would be interested to hear from anyone using this on the lower bands.

Roll on the sporadic e season.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.