eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Amplifiers: RF Power - HF & HF+6M | HARRIS RF-110A Help


Reviews Summary for HARRIS RF-110A
HARRIS RF-110A Reviews: 2 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: Amplifier, Radio Frequency
2-30 Mc Freq Range at 1 KW AM-FSK-CW-SSB
[US Government contracts: USN, USAF, USA, DOD,
FEMA].
Requires separate RF-124 220 volt, single phase PS.
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the HARRIS RF-110A.

W5DTW Rating: 5/5 Feb 4, 2018 13:58 Send this review to a friend
12 years now and still no problemo  Time owned: more than 12 months
10 years after my first review and the RF-110A is still loafing along at 1.5KW with no failures or loss of output I am running it with my IC-7700 now using separate RX-TX lines from the radio, the TX is feeding a 30dB attenuator making it virtually impossible for the Icom to ever see high reflected power and the Harris does the antenna switching internally.
 
W5XE Rating: 5/5 Jul 24, 2006 11:01 Send this review to a friend
Great amplifier.  Time owned: more than 12 months
I agree with Mike W4MDL/W0YR about the RF-110.
I had the use of the RF-110 amp with the Harris
270-5 system which used the RF530 receiver and
the solidstate transceiver to drive the 110's.
Had 3 of them in operation. 1 of the amps had
the 8122 drivers, the other two had the 4cx250b
but all performed excellently. They will run at
the designed 1kw pep output level for day after
day, week after week for months or years.
Expensive if one has to replace the tubes but
they were primarily in government service so
the replacement costs not a factor. I might
add that the RF110/124 system was also a part
of the RF-131 system of which that exciter did
all modes including ISB.

Ray, W5XE
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.