- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Filters, Audio: (DSP and others) | BHI NEDSP 1061 Help

Reviews Summary for BHI NEDSP 1061
BHI NEDSP 1061 Reviews: 28 Average rating: 4.9/5 MSRP: $139.00
Description: DSP Filter Capable of being added to any rig.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the BHI NEDSP 1061.

Page 1 of 3 —>

AI4WC Rating: 5/5 Jan 8, 2016 07:43 Send this review to a friend
Great!  Time owned: 0 to 3 months
I had W4RT install it on my FT-817ND-two day turnaround service! As others have said, the difference is amazing, and must be heard to be believed. I am hearing challenged, so using it with my headphones "changed the world" for me. It is money well spent, and I would do it again in a heartbeat! The fast service and communication with W4RT was "icing on the cake."
WA2ISE Rating: 4/5 Mar 15, 2015 14:30 Send this review to a friend
Works well  Time owned: 3 to 6 months
As others mentioned, it does a good job of reducing noise. Though you can get other baseband (not RF) audio noise if you don't install it right.
Exercise some care where you get its supply voltage from. I installed it in my TS440SAT, first tapped the 7.5VDC supply on the IF unit board. This caused some audio junk getting into the baseband received audio. Sounds a little like a motorboat. Changed its supply to tap onto the 13V supply to the audio output chip, with a series 100 ohm resistor to drop around 5V off this 13V (board specs say it draws 50ma), to reduce noise coupling and reduce heat on its voltage regulator. Noise now gone. I also connected this board's ground return to a ground near the IF unit board audio area, to avoid ground loops.
Didn't notice the problem until I turned the RF gain way down. HF noise tended to drown out the motorboat, the DSP board also reduced it.
KI4RYV Rating: 4/5 Mar 11, 2015 15:55 Send this review to a friend
It works.. but Keyboard has scary cheap buttons  Time owned: 0 to 3 months
Surprised.. Its nice.. I installed mine in the Palstar SP30B. Its a nice combination. However I did not believe that the Palstar was any better speaker than a Yaesu SP-6 that I have. So, Im going to get another one and install it in the SP-6 because it will be much more flexible. The Yaesu speaker has two input and a button to switch between radios. Thus having the BHI DPS for both radios AND I can plug a headphones in the front of the speaker and have the BHI DPS in my headphones.. Or plug powered speakers to the Yeasu SP-6 headphone jack and the audio becomes a pass through on the SP-6 that uses the BHI DSP and comes out the powered speakers..

I gave it a 4 because Im scared of the key board.. its buttons are cheap feeling and I dont know where I will be with it years from now then they break. Will BHI offer a replacement? Will a replacement fit the same holes I had to make in the speaker cabinet? I dont want to work on it again later because of cheap buttons. And I would have rather had a knob with position.

Some advice, make sure to mount the heatsink on more metal. It needs the extra cooling dissipation.
AA4PG Rating: 5/5 Jan 22, 2015 18:40 Send this review to a friend
Works great with Icom 735  Time owned: 0 to 3 months
I installed the module is a TS440 a year ago and that worked well. Just installed it in an Icom 735 and it works equally well. To install in the 735, replace capacitor C279 with the module and get power from nearby connector J10.
W9RWF Rating: 5/5 Nov 14, 2014 21:46 Send this review to a friend
It works and is well worth it!  Time owned: 0 to 3 months
I installed this module into my TS-440S/AT. It has worked perfectly and really cuts down on the noise. I strongly recommend it.
EA5TV Rating: 5/5 Feb 12, 2014 02:56 Send this review to a friend
Great solution  Time owned: 0 to 3 months
I have ridden the BHI nesdsp 1061kbd on my old TS440S, and it really is no longer an old TS440S, now a young TS440S/AT/DSP
Although I have had a few difficulties for installation, due to my impatience, I managed to do it, checking how wonderful it is to hear something that was impossible yesterday.
After seeing the excellent videos of John W2JAW on its installation and operation instructions and Megaherz magazine-published in France by Jean Paul, F1LVT really has not been difficult assembly.
The hardest thing was to eliminate the coupling capacitor, because my eyesight is not what it was and need a small magnifying glass, but the rest was all pretty straightforward.
If you doubt that this can be a good solution to enhance your rig, do not hesitate: it is.
Best regards from Spain
Rafa. EA5TV
KJ4FGI Rating: 5/5 Dec 25, 2013 18:30 Send this review to a friend
TS440S/AT install  Time owned: 0 to 3 months
I just installed the NEDSP1061-KBD in my TS-440sat, Fantastic! It's a new radio, well sounds like it.
I am using the Voice button as the DSP selector instead of the one that came with the kit. I found the instructions to use the Voice button on the web.
I do not have the voice option installed so the switch was unused. I did not have to drill any holes. It is amazing,the quality of the sound after using the filter, I have an Icom 706MK2G with DSP and I had a Yaesu FT-100, no comparison to the BHI, the BHI blows it away. I am going to but another to install in my Icom, that's how amazing this DSP is. Purchased in America from W4RT, I had it in a few days. My emails were answered right away, great person to do business with.
KJ4VPI Rating: 5/5 Mar 28, 2013 20:58 Send this review to a friend
Quite effective in a TS-440S on SSB or AM Voice  Time owned: 0 to 3 months
After seeing some of the videos produced by W2JAW on YouTube, I thought installing this DSP module in my TS-440SAT would be a cost effective upgrade for reducing noise on SSB voice ops or possibly for AM SWL listening.

I have periodic TS-590S and TS-990S envy.

Offers up to 8 levels of tone and white noise reduction. Relatively simple to install in a TS-440S. Very simple to operate.

Don't expect it to work with CW or digital modes. Watch the videos produced by W2JAW and others to get an idea what to expect.

I am pleased with the product and would recommend it to others.

73 de KJ4VPI, Sam
NW8Z Rating: 5/5 Feb 17, 2013 21:01 Send this review to a friend
Installed BHI NEDSP1061-KBD in Kenwood TS440S  Time owned: 0 to 3 months
I just installed the BHI NEDSP1061-KBD DSP Unit into my Kenwood TS440S.

I have taken pictures and videos of it, but the rules won't permit me to give links to you.

I can tell you that It is like night and day for an older rig without DSP to have this filter installed into it.

You can't go wrong getting this filter as it filters all hiss, static and noise passing just the audio on it's highest setting. It offers both 4 mode and 8 modes, as well as two demonstration modes.

Make your Kenwood TS440S a Kenwood TS440S/DSP

I agree that once you use the BHI DSP unit, you won't want to go back.

73 and great hearing.

KB9JLO Rating: 5/5 Dec 31, 2012 14:29 Send this review to a friend
Excellent  Time owned: 0 to 3 months
It is a tough install in the FT-817 but manageable. Just take your time and don't get in a big hurry. The thing I disliked were the two ribbon cables. I hate those connectors.
The filter is incredible. I run mine in 4 level mode as well. I just get confused with 8 choices! :-)
I can't believe how good this works. It makes SSB sound so good. And even on the highest level there is little distortion. I love the 817 but I love it more with this filter.
Page 1 of 3 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.