eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Electronic Component Suppliers | Cambridge CPL-259-1 UHF-Male crimp connector Help


Reviews Summary for Cambridge CPL-259-1 UHF-Male crimp connector
Reviews: 1 Average rating: 4.0/5 MSRP: $1.12
Description: Crimp-on UHF Male connector for RG-58/U
Product is in production.
More info: http://www.mouser.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Cambridge CPL-259-1 UHF-Male crimp connector.

NO6E Rating: 4/5 Nov 6, 2006 20:20 Send this review to a friend
Inexpensive and fast  Time owned: 6 to 12 months
Like most hams, I've soldered lots of coax
connectors. It's a particular problem on small
cable like RG-58, where the heat needed to solder
the braid often deforms the dielectric.

A better solution, and the one most professionals
use, is a crimp-type connector. In this case,
an inexpensive tool (< $30) lets you use
connectors that cost only $1.05 in quantities of
25. No heat is involved. Using a suitable tool,
like the Eagle 382-301C, you apply three crimps
to the connector -- one for strain relief over
the jacket, one for the braid and one for the
center contact. It takes less time to do than
to describe.

A club could invest in the tool, and let
members use it to make up coax jumpers
quickly.

Why "4" instead of "5"? Well, the connector
is not weatherproof (like any UHF connector),
so you need to protect it carefully if it's
installed outdoors.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.