- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Interfaces, Radio to computer, amp, rotor, coax switch, internet | RigExpert USB-to-transceiver interface (Standard version) Help

Reviews Summary for RigExpert USB-to-transceiver interface (Standard version)
RigExpert USB-to-transceiver interface (Standard version) Reviews: 13 Average rating: 4.8/5 MSRP: $205.
Description: This is another product created by MixW / RigExpert Team for operating digital modes, voice recording and playback (sound chip is totally compatible with any ham radio software), CAT system, which controls transceiver frequency, mode and other functions of various models of transceivers, FSK operation (crystal-clear RTTY signal) and additional COM port for connecting serial devices such as TNCs or antenna rotors.

In addition to a year of full warranty we offer our customers a 30-day money back guarantee (100% refund), if you don't like the product.

Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the RigExpert USB-to-transceiver interface (Standard version).

<— Page 2 of 2

VE3ZPD Rating: 5/5 May 14, 2007 04:42 Send this review to a friend
Great device!  Time owned: 0 to 3 months
Purchased RigExpert Standard after reading a Sound Card review in May 2007 QST.
I have it just for a few days now, but really enjoy it. The installation went completely automatically on my laptop with WinXP. I'm not aware of any other interfaces that come with Microsoft Certified Drivers. MixW2.18 automatically recognizes this device. Manual contains very detailed examples of set-up with the most popular software: MixW, DigiPan, MMTTY and DX4WIN.
Additional Serial port at the rear is a real asset if you need to control older equipment with only COM port, for instance, rotor or TNC controller. And it's really small, much smaller than similar interfaces offered by other companies on the market. Very good product,
highly recommended.
KB3Z Rating: 4/5 May 8, 2007 04:40 Send this review to a friend
Nice Interface  Time owned: 0 to 3 months
I just received the interface since Saturday 5/5. It was easy to hook up to my Kenwood TS-480SAT and the installation software worked flawlessly. It is nice and small which is a real asset when you are trying to save room in the shack. Documentation was adequate and Yuri is more than happy to help you if you are having a problem.
WB5TTY Rating: 5/5 Dec 27, 2006 19:15 Send this review to a friend
Very nice Interface  Time owned: 0 to 3 months
I received the RigExpert on December 26, 2006. I have installed it and it seems to work well. It is a very nice Interface and works great with MixW. MixW recognized the RigExpert Standard and did a perfect setup on 2 different computers. All I had to do was tell MixW I was running an Icom IC7000 and all setup was automatically completed. The unit was supplied with a driver CD which also had MixW and a manual. Setup information for other software was supplied to help in a manual setup.
<— Page 2 of 2

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.