- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF Portable (not mobile) | Hi-Q Antenna TriPod Help

Reviews Summary for Hi-Q Antenna TriPod
Hi-Q Antenna TriPod Reviews: 1 Average rating: 4.0/5 MSRP: $75
Description: This TriPod will allow our Hi-Q Series, or many other mobile antennas, to be used for portable operation. The TriPod was originally designed as a rugged speaker stand. We have converted it to accommodate a Hi-Q Antenna for travel or portable use.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Hi-Q Antenna TriPod.

KB3CS Rating: 4/5 Feb 4, 2007 18:49 Send this review to a friend
needs a couple extra things and don't forget to use sandbags  Time owned: 0 to 3 months
The product as shipped is not exactly as described but is entirely suitable for its intended purpose.

The 3/8x24 stainless steel stud is not provided. Missing too, is the "several stainless steel screws to accept ground radials".

The insulator provided is a finely machined thermoplastic (delrin?) and aluminum part with the necessary 3/8x24 threaded hole in the aluminum insert to accept a mobile whip.

The aluminum tripod itself is a Dayton TSS100K Tripod Speaker Stand ($40) minus the speaker mounting plate and the carrying bag (note: the MFJ tripods [MFJ-1918/1919] are made of steel which MFJ itself warns will easily rust).

To provide an attachment point for radials:

1 1/2" EMT Conduit Hanger $0.83
1/4" dia. by 1/2" fine thread (24) bolt, nut and two washers $0.27

Grand total = $1.10 .. all parts purchased at Home Depot.

an example with picture of a conduit hanger can be found here:

slip the insulator into the conduit hanger with the hanger's bolt below and on the opposite side from the whip connection. tighten the conduit hanger firmly but do not overtighten.
note: the hanger mounting hole is now just below the whip connection.
use the 1/4" dia. bolt, nut and washers in the hanger mounting hole for connecting the radials.

For safety, buy a 50lb bag of paver's sand ($3.30) and fill three 18lb sandbags (Impact Saddle Sand Bag $18.95ea, B&H# IMSBE18O at and use them to stabilize the tripod.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.