|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
You can
write your own review of the Duracomm DP Series Power Distribution Panels.
|
K7ICU
|
Rating: 4/5
|
Feb 14, 2007 12:49
|
Send this review to a friend
|
|
Gets the job done.
|
Time owned: 6 to 12 months
|
|
I have the DP-6-75 (6-position) model. It has two 6-position distribution blocks mounted at the rear, both with one fuse socket per position. You can attach spade lugs to your power wires and securely screw them down. This sort of panel is usually configured with hot wires distributing from one block, and return wires attaching to the other block. If you do the same, the only option you have to get continuity through the return block is to install 40A ATO fuses as "jumpers." Duracomm did not provide another means to do this and couldn't suggest a better way either. These are simple, sturdy and look good, but they're far from professional fuse panels (yet also much less expensive).
|
|
If you have any questions, problems, or suggestions about Reviews,
please email your Reviews Manager.
|
|
|
