- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Receive Pre-amps | Angle Linear PHEMT (GaAs FET) Preamplifiers Help

Reviews Summary for Angle Linear PHEMT (GaAs FET) Preamplifiers
Angle Linear PHEMT (GaAs FET) Preamplifiers Reviews: 3 Average rating: 5.0/5 MSRP: $144-235
Description: PHEMT (GaAs FET) Preamplifiers
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Angle Linear PHEMT (GaAs FET) Preamplifiers.

WB0YLE Rating: 5/5 Jun 6, 2011 16:27 Send this review to a friend
Outstanding  Time owned: 3 to 6 months
Hooked up between a Decibel Products 222MHz duplexer and Chip's pre-selector filters tuned to my input frequency.

Night and day difference in received signal quality (converted Micor) as opposed to receiver straight out of duplexer. Quiet, increases the useable signal nicely, and when combined with his filters, gets rid of a lot of extraneous schmutz and noise, not to mention a minor desense problem that came and went (until I went thru the system yet again with a service monitor and all the other test equipment) as the transmitter keyed sometimes. No, not a bandaid...I solved that problem, and this just was the last piece that absolutely made my machine rock.

Buy this puppy with absolute confidence. You will NOT be sorry.
N2XPM Rating: 5/5 Nov 25, 2009 08:29 Send this review to a friend
Superb  Time owned: 0 to 3 months
Just purchased this pre-amp from Chip a month or so ago. Outstanding performance without raising the Noise floor on the repeater. I'd say, proably the best preamp device that I have ever purchased.
Preamp is connected to a 4 cavity DCI filter.
K7ICU Rating: 5/5 Feb 14, 2007 13:04 Send this review to a friend
Excellent product!  Time owned: 6 to 12 months
I have a single-stage model installed in one of the best 70cm repeaters in town. It provides just the appropriate gain (< 15dBm) after a BpBr duplexer and two bandpass cavities. No noise or intermodulation problems. It's well engineered, solidly constructed, and couldn't be easier to get going.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.