- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Transceivers: VHF/UHF+ Amateur Base/Mobile (non hand-held) | Kenwood TMV71A Help

Reviews Summary for Kenwood TMV71A
Kenwood TMV71A Reviews: 100 Average rating: 4.6/5 MSRP: $399.00
Description: The advanced Kenwood TM-V71A dual bander provides sophisticated, high-powered performance on 2 meters and 440 MHz. Power levels are 5/10/50 watts on both bands. The large radio display clearly conveys the status of the radio and can be set to green or amber.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Kenwood TMV71A.

Page 1 of 10 —>

N7AY Rating: 5/5 May 7, 2017 21:09 Send this review to a friend
Just works, and works well  Time owned: more than 12 months
I've had my TM-V71A for 2 years now. I use it daily and am very happy with it. It just works and does it well. Notable features are cross-band capability, Remote control from HT, ease of use, dual channel, direct computer connect for digital work, 180 degree flipping head, clear and readable display, sound quality.

It isn't perfect, in my opinion it has a few minor flaws, but not enough to rate it a 4. They are: Med power level is 10W, it should have been 20-25W. Fan noise could be a little lower. I wish is was 75W instead of 50W on high power.

I would recommend the radio to anyone - money well spent.
K9OBX Rating: 5/5 Feb 2, 2017 08:18 Send this review to a friend
Good Mobile   Time owned: 0 to 3 months
This little radio surprised me. I have owned a number of Yaesus and this is my second Kenwood ( I still have the other one). It works flawlessly in cross band repeat mode and is a perfect match for my TH-D72A handheld. Together, with almost any HT, I can completely control this radio from outside the car. I can put it in and out of cross band repeat and even change frequencies and a whole lot more. I would highly recommend this or the 710

I would definitely buy it again.
N8FVJ Rating: 5/5 Dec 19, 2016 17:59 Send this review to a friend
Good Receiver  Time owned: 0 to 3 months
This radio has been available for quite a few years. It works very well, so no good reason for a replacement. Very sensitive receiver, seems very resistant to intermod. I wish the radio had 25 watt mid power range rating, not 10 watts. Audio is not as full as my older ICOM IC2350, but still very clear. Manual is not so good. Lists buttons not even on the radio. Price is competitive. I rate a five.
K4KXX Rating: 2/5 Nov 13, 2016 09:57 Send this review to a friend
Dead carrier byitself?  Time owned: 0 to 3 months
I bought two of these TM-v71's one for my mobile adn one for my base hoping to set up an Echolink Link at my QTH. For abot 3 weeks we ( meaning the local hams on simplex) have been encountering a problem with a dead carrier on 145.600. After messing around trying to track the signal I noticed it was coming from my house !!! Apparently my radio would automatically send a dead carrier all by itself for upwards of 10 minutes ! I'm going to call Kenwood in the morning. This radio is only about 2 months old!!
N4WFK Rating: 4/5 Oct 17, 2016 17:06 Send this review to a friend
Good radio  Time owned: more than 12 months
Good radio and I have 3 of them. My only gripes are that two of the radios have PTT button issues and none are even a year old yet. After a while, they seem to bind when you are keying the microphone and it gets annoying.

Do not buy the VGS-1 option if you are expecting to get voice confirmations to the DTMF tones you send while remotely controlling the TM-V71A. My ICOM 2410 did this wonderfully 20 years ago so I don't know why Kenwood dropped the ball on including this functionality for the optional and expensive voice board.

Time will tell if the rest of the radio holds up but I'm a Kenwood fan so I'll try to be optimistic.
IW2BSF Rating: 5/5 Aug 28, 2016 01:48 Send this review to a friend
Amazing radio !  Time owned: 0 to 3 months
i just buy this nice radio last amazing ! my dubt is to buy or this radio (a old kenwood model, hi) or the new icom-2730 , i prefere kenwood.

The radio scanner is very sensible, and the power is too high.

The program to program this radio is FREE by kenwood (that is good!!) but bad that the cable cost over 40 dollars... i have buy a "normal" RS-232 to USB adapter and i home-made the cable by my-self for 3-4 dollars !


- very sensible on MARS band
- have the trasponder mode (v-v u-u or v-u )
- as remotable with others radio via dtmf
- is possible to connect to digital DATA
(aprs , packet modem )

the NEGATIVE points of this radio is:

- the internal spekars is not very good
(in spacial mode if you use in car !)

- the fan is rumor when come on

- the micophone NOT have the same colours of the
frontal pannel !!! very bad.... the micro keys
have only the bad amber colorized !

i have MOD and fix this porblem with a nice "white" colour of this key, if you interest to
mod and fix this see on my web site:

with a 4 white led smd cost of 1-2 dollars you change the colour amber to a best white !

best 73 de Rudy - IW2BSF

HAMSTUDY Rating: 5/5 May 13, 2016 22:35 Send this review to a friend
Excellent VHF/UHF Transceiver  Time owned: 0 to 3 months
I studied the similar VHF/UHF models from Yaesu and Icom and also the VHF-only models (including Kenwood's 281A VHF model). The Yaesu 2900R looked very good but once I decided to go for VHF and UHF I studied the competitive VHF/UHF models in more detail by reading reviews, watching Youtube reviews, studying the manuals, and actually operating the units at a local store. In some cases, even with the manual in hand some of the other models just didn't seem as logically designed as the TM-V71. While I wouldn't call any of the radios' user interfaces super intuitive the TM-V71's UI combined with the many favorable reviews regarding the transmit/receive performance persuaded me to go with this particular Kenwood.

I should point out that I use the radio as a desktop base station rather than in a vehicle, so my experience might not be relevant in all respect to users with mobile installations. I use a Diamond SX-400 which makes monitoring power levels and SWR easy and fun. The TM-V71 and the SX-400 are powered by an Alinco DM-330MV.

Another disclaimer is that this my first radio other than a HT so my ability to compare radios is pretty limited. My comments might be of interest to other first time users more than for experienced users. Along these lines even though I selected the TM-V71 over the competitive units in part because of it's "ease of use" there was/is a learning curve. Between the user interface and the manual you can figure out how to operate the many features without a lot of study but keep the manual handy because there are a lot of features and the manual can save some time. Youtube also offers a lot of help with this model. I've only had the radio about 3 months and it seems that the more you use it the more you can anticipate how to invoke features.

The TM-V71 makes it easy to monitor two stations at the same time - such as a VHF and a UHF station or whatever frequency and a weather channel. Learning to use the crossband feature and learning to use repeaters have been very cool parts of my early ham experience. One of the local clubs has good activity on both their VHF and UHF repeaters so it's easy to find and join in a good conversation at many times. The ability to easily work on two bands has become handy and fun. It's fair to say this radio has led me to a number of good new ham buddies.

As for the performance I seem to get plenty of good reports on the strength and quality of the signal both with repeaters and on simplex. I use the radio with an Elk Log Periodic antenna so maybe that helps; the transceiver and antenna make a great pair.

As mentioned by others one nice change Kenwood could consider would be adding a power setting between 10 and 50 Watts.

Overall this radio has helped make my start into hamland very enjoyable and I highly recommend the TM-V71.
K6BCM Rating: 4/5 Apr 27, 2016 16:39 Send this review to a friend
Good reliable radio lacking a feature  Time owned: 3 to 6 months
Great radio, solid performer, my only real complaint is that the radio has a 30 mhz maximum reapeater offset. It would be nice if Kenwood would make the TM-V71A capable of "crossband offset". Being able to listen on one band and transmit on the other, from one VFO. If it did that I would give it a 5 rating.
VE6DO Rating: 5/5 Apr 11, 2016 21:18 Send this review to a friend
Great radio  Time owned: 0 to 3 months
I absolutely love this radio. It is well thought out and the learning curve is pretty simple. I did watch some YouTube videos before getting the radio to learn a few things. That helped and the manual is not that bad for other things. I also have like 4 friends with either the V71A or D710A so they are there for my questions. The only thing I would have liked is 4 power levels .. 5,10,25,50. Just cause some times 10 does not cut it and you need to go to 50. A step between would have been useful. I do not like running on H unless I have to. I have owned several other mobile radios in the past and this one is a step above. In my mind .. you have the Yaesu radios (work well but just too messed up in the user interface department) to Icom (just plain messed up and often so confusing to use). Kenwood seems to have a nice balance between the needed items and just a radio that does not work well. As you can tell I am a huge fan of a good user interface and this is by far the best thought out design of the big 3. It does help that I am using it as a base so it is not like I will smash up anything, like my car, due to poor design.
KH6TA Rating: 5/5 Sep 3, 2015 14:08 Send this review to a friend
Flawless Full-Featured V/U radio for competitive price!  Time owned: 3 to 6 months

I wanted a current V/U radio with a great-working X-band repeat function, and this is it! I was so impressed with this radio that I bought a 2nd one for the hamshack!Tx/Rx audio is very good quality, and power output on both radios is per specs.I'm using the RT Systems programmer which makes programming/cloning a breeze! The Icom software is however, a free download. I use Rx on Marine, Fire & Police, Wx freqs,MURS & GMRS and it hears great at least up to 160 megs on VHF and 480 on UHF.

I didn't buy the VS-1 on the 2nd one and turned it OFF on the mobile one. There are times it could be useful I guess.

My only complaint, and it's personal is that I don't like a green display and wish it had blue instead of green, but the amber is easy on the eyes and is very acceptable.

Page 1 of 10 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.