- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Feedlines (coax, ladder-line, etc.) | Belden 9913 Help

Reviews Summary for Belden 9913
Belden 9913 Reviews: 2 Average rating: 3.5/5 MSRP: $$1.24 per foot
Description: This is the low loss brother to the 9913F. 50Ohm coax with a velocity factor of 85, and a nominal Delay of 1.2 ns/ft
Attenuation at 100 feet 400 Mhz 2.6
Power handing at 50 Mhz 1609 watts. 3217 watts at 10 Mhz, and 4021 watts at 5 Mhz.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Belden 9913.

W1EL Rating: 2/5 Sep 26, 2009 16:21 Send this review to a friend
okay  Time owned: more than 12 months
The air dielectric design sucks water in like a straw when the cable is partially outside. I've never been able to keep it dry when any portion of the run is outside. There is also the question of the dissimalar (sp?) metals in the shielding. Given those limitations, I don't keep it in stock.
KC9MXZ Rating: 5/5 Sep 26, 2009 16:11 Send this review to a friend
Great low loss coax  Time owned: more than 12 months
Very low loss coax compared to most, especially at frequencies above HF. Quite stiff because of large solid center conductor. I like the fact that when you bend it it stays where you put it. May not be good where flexibility is needed however.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.