- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: VHF/UHF+ Directional (Yagi, quad, etc.) | Blue Star Antennas 6 Meter 4 Elements Yagi Beam Antenna Help

Reviews Summary for Blue Star Antennas 6 Meter 4 Elements Yagi Beam Antenna
Blue Star Antennas 6 Meter  4 Elements Yagi Beam Antenna Reviews: 16 Average rating: 4.2/5 MSRP: $100.00
Description: Covers 6 Meter Ham Band.
Maximum Gain 9 dBd Front / Back 20dB
SWR > 1.5:1

* Easy to set up and use. Delivers outstanding results.
* Computer designed, SWR tunable.
* Can be horizontally or vertically polarized,
* Uses standard 50 ohm coax with PL-259 terminals.
* Heavy Duty, weatherproof construction:
* Boom is machined from 6061 T-6 Structural Square Aluminum Tube.
* Elements are machined from 3/8" Solid aluminum round 6061 T-6 stock and attached to the boom with stainless steel hardware.
* Clamps to masts up to 1 1/2" in diameter.
* Adjust for any frequency from 50 MHz. to 54 MHz.
* Mounts Horizontal or Vertical
* Elements grounded for lighting protection
* Approx. Turning Radius 80 inches
* Power Legal Limit
* Approx. Wind Surface 2 SQ Feet

Antenna is optimized for number of elements and size.
Use for 50-54 Mhz, Ham radio, or Packet Radio.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Blue Star Antennas 6 Meter 4 Elements Yagi Beam Antenna.

<— Page 2 of 2

W5JAO Rating: 4/5 Jun 4, 2009 09:22 Send this review to a friend
A good yagi for the $$$  Time owned: 0 to 3 months
My first 6m yagi ! I purchased my Blue Star 6m 4el. beam on E-bay for about $90.00. about what buying new material would cost then fab. It arrived in fine shape about 8 or 9 days later, and the day it arrived, I set it up per the instruction booklet in about an hour and up on a 8 foot test mast, achieved 1.2 to 1 at 53 ohms over most of the SSB frequencies in another 30 min. Much better than the inverted "L" I have up

I give two thumbs up to this antenna. W5JAO
G0KSC Rating: 5/5 May 26, 2009 23:52 Send this review to a friend
a nice little Yagi for the money  Time owned: 6 to 12 months
I design antennas myself and have commerical companies sell antennas of my design. I live in the UK but travelled to Georgia in the US for 6 weeks last summer visiting my parents and wanted an antenna to use my ft857 while I was there. I found the Blue Star on Ebay at a very resonable price so bought it.

It was very easy to contract, rugged and light weight at the same time. One of my first contacts was a multi-hop E skip QSO with the West Coast.

I was happy with the performance of the antenna and it is now packed away in the garage at my parents awaiting my next vist.

Justin G0KSC
FM5BH Rating: 5/5 Aug 3, 2008 05:31 Send this review to a friend
A very good ant  Time owned: 0 to 3 months
This is my very first 6m antenna
and I was QRV on the magic band this week with this antenna for the first in my ham life.
I followed the instructions and put it on the tv mast on the roof beaming to the north.
after several cq I worked EA7 - CT1 - EA6 - HI3 - FM5.All the dx in CW with 559 report.
My tx is the FT897 bear foot.
I learned that CW is very useful to work the DX like on the top band (160M);
The blue star antenna is very rugged.
If you want a low budget and a vedry good ant to start on the magic band you can buy it.
I will put it higher with a rotator very soon.
I have the 6M virus


Laurent FM5BH
N6NKS Rating: 5/5 Jun 27, 2008 16:54 Send this review to a friend
Great beam - works fab.  Time owned: 3 to 6 months
My first 6m beam too! I purchased my Blue Star 6m 4el. beam through the 'bob-and-linda' store on E-bay for about $90.00. It arrived in fine shape about 8 or 9 days later, and the day it arrived, I eagerly set it up per the pretty decent instruction booklet. Since I have yet to obtain a rotor and to undergo the effort of mounting it really high up on a pole I have, I opted for a temporary set-up whereby it is on a pole only 8 feet above the ground, in horizontal-polarization fashion, to an cnecrete unbrella stand in the back yard. I simply hand-turn the beam whever the skip is coming from.

Even with my modest setup, running 100 watts into this low-beam, after eagerly awaiting 6m to open up this past spring and summer, the 6 meter fun began! On several occasions, I got a "strong signal" report from even mobils. The big fun was during the ARRL VHF QSO Party when 6m opened up double-hop to FL from my California desert location. SO this beam, in its totally sub-optimal location in my yard, ha sproven to be a great performer. Tuneup was a snap. per instructions - I just set the element via the instructions, and was happy to have very excellene (low) SWR. That was probably the hardest part of set-up, and it was easy too. So I give two thumbs up to this antenna! Steve N6NKS
WA8MEA Rating: 5/5 Apr 15, 2008 12:17 Send this review to a friend
My very first Yagi!  Time owned: 6 to 12 months
I was SO afraid that after all of the work (a few hours on a Sunday afternoon....) that the dumb thing would not work right....and I would have to put it up and take it down just like adjusting a dipole. I was in absolute shock when I noticed a 1.1 to 1 match the first time up in the air! In fact, the SWR on the upper band edge wasn't even high enough to monkey with since I was using it for CW/SSB anyway. (And had adjusted the elements and gamma match according to instructions for this lower frequency segment.) It was only about 1.6 to 1 on the top side of six meters.

Great craftsmanship, easy instructions, and again....I was SO HAPPY to hit the SWR I did right from the get-go!

I worked a lot of "E" skip last summer. And used a simple Archer rotator available at "Radio Scrap."

By far, a quality Yagi at a VERY reasonable price and polite, prompt service. I'm hoping to use it once again to work a little "E" skip on the magic band this summer.
N1RIK Rating: 0/5 Jan 14, 2008 21:23 Send this review to a friend
Didn't work, poor customer service  Time owned: 0 to 3 months
This antenna looks unbelievably rugged, and I thought it would be a performer, however, I could not get it to resonate above 46.7 MHz. I was in contact with Bob-and-Linda Amateur Accessories (the ebay seller I bought it from) and Blue Star Antennas about the issue. They had insinuated that I put the antenna together wrong, so I verified with them that I put the elements together as spec and also verified the element legnths. I also adjusted the gamma match to specs, and then whatever it took to get the job done, but still could not get a match. After I had asked for a new gamma match seeing the antenna was spec, both Bob-and-Linda's and Blue Star Antennas stopped emailing me and responding to my emails. Finally after a week of my emails being shunned, I had to open up a Paypal dispute to get someone's attention. At that point Bob-and-Linda's responded VERY quickly, but inferred that I had been using the reflector as the driven element. This really insulted me not just for the fact I've been a ham for 14 years and have built yagis from scratch, but I informed them that I had the elements on in order and measured all the elements on one of the millions of times I had pulled the antenna down off my 20 ft. mast. They said I could send the antenna to Blue Star and they could check to see it was defective, however they still were insinuating that the antenna was still fine. At this point, I didn't want a new antenna or want it fixed. I just wanted my money back. I finally did get a refund 3 days after they received back the yagi. I would of been happy to send the antenna to Blue Star or Bob-and-Linda's for them to check it out if they offered, however they decided to suggest that after I had to get Paypal involved. I'm sure I just got a dud on this antenna, however they could of saved me as a customer if they had some sort of decent customer service. Leaving a customer in trouble blowing in the wind for a week on email lockdown does not improve customer service etiquette. Well this week I'm purchasing a Cushcraft A50-3S. BTW I've never seen a gamma match as weak as what I found on this antenna. The gamma match aluminum tubing was very flexible, and had to be bent back into reasonable shape after I first got the antenna. The material is highly mailable. The adjustment rod of the gamma assembly is insulated #12 AWG copper wire. It too is very easily bent. Too bad my volt meter was toast because I would of tested it. -- 73 ~ Bill
<— Page 2 of 2

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.