eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | QRP Accessories | Norcal S9 Signal Generator Help


Reviews Summary for Norcal S9 Signal Generator
Reviews: 1 Average rating: 5.0/5 MSRP: $30.00 shipped
Description: The NorCal S9 signal generator is a crystal-controlled oscillator which produces switchable output levels at selectable frequencies. All of the board-mounted components are included in the kit, all you need to add is a 9V battery. Rubber feet are supplied for enclosure-free operation, or you can easily fit it into an Altoids tin.
The S9 level is useful for testing and calibrating receiver S-meters while S1 level can be used for receiver alignment and sensitivity checks. The oscillator works with most fundamental mode crystals, so you can substitute your favorite frequencies up to 1 5m. The output harmonics also can be used to reach into the higher bands.

The majority of the components are surface mount technology (SMT), but are easily mounted due to wide component spacing. If this is your first SMT kit, be sure to read the assembly tips section which will guide you to a successful assembly.

Dimensions 3.5" x 2.125" x 0.6" (HWD) excluding connector
Power Requirements 9V battery, less than 2mA typical
Output Frequencies 3.579 MHz, 7.040 MHz, 10.116 MHz, 14.060 MHz
Frequency Accuracy Within +/- 1KHz
Harmonic Content 2nd: -4dBc +/- 2dB
3rd: -1 1dBc +/- 3dB
4th: -17dBc +/- 3dB
Output Impedance 50 Ohms
Output Level 1. Low: 1uV (-107 dBm)
2. High: 50uV (-73 dBm)
Amplitude Accuracy 1. Low Level: +/- 3dB (2 dB typical)
2. High Level: +/- 3dB (1.5 db typical)


Product is in production.
More info: http://www.norcalqrp.org/s1s9generator.htm
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Norcal S9 Signal Generator.

N4QY Rating: 5/5 Dec 29, 2007 08:56 Send this review to a friend
Well Pleased  Time owned: 0 to 3 months
The kit was received quickly. All parts were there and the instructions were very good and complete.

The kit went together quickly and worked the first time.

It has SMT parts and would be a good kit for getting some SMT experience.

I have built several Norcal kits and continue to be impressed with the quality of their kits and PC boards and would highly recommend this one.

I have a commercial quality HP signal generator, but the portabilty of the S9 signal generator makes it a great addition to my work shop.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.