eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Ham radio kits | FoxTrak: APRS Tracker Kit Help


Reviews Summary for FoxTrak: APRS Tracker Kit
FoxTrak: APRS Tracker Kit Reviews: 2 Average rating: 3.0/5 MSRP: $22.00
Description: FoxTrak is a PIC16F84A APRS tracker. Uses R/A D9M/F Connectors and 1Amp regulator to power your GPS. Now available in kits with metal case.
Product is in production.
More info: http://www.foxdelta.com/products/foxtrak.htm
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the FoxTrak: APRS Tracker Kit.

VE7JWS Rating: 2/5 Mar 6, 2011 13:17 Send this review to a friend
Frustrating  Time owned: 0 to 3 months
Easy to build, frustrating to get working. Documentation for adjustment and interface cabling lacking, I had to go to the Byonics website to get any useful information, as this is merely a clone of that unit. Have only gotten a few useful location packets while on the bench, none while moving.
G4ILO has a blog entry documenting his frustration with his unit, and the difficulties in getting a FoxTrac working.
So far; thumbs down.
 
KC0WIF Rating: 4/5 Jun 21, 2009 22:01 Send this review to a friend
Good basic circuit board  Time owned: more than 12 months
I constructed two of these boards for APRS tracking. It is essentially similar circuit as TinyTrak3. I had problems with RF feedback with TinyTrak3 (with Icom IC-V8) and found the problem cleared with FoxTrak. Foxtrak has a larger ground foil area, the circuit elements are flat to the foil giving it a smaller chance of RF feedback (compared to TinyTrak perpendicular elements) and several extra capacitors across the power supply and ground to minimize noise. I also tried the Foxtrak-m which gave me RF problems.

Where Foxtrak lacks is the supplied main chip programmed with less features. I simply substituted a TinyTrak chip. If you set the jumpers right you can run it as a TinyTrak3.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.