- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

donate to eham
Reviews Categories | Receivers: General Coverage | QuickSilver QS1R Help

Reviews Summary for QuickSilver QS1R
QuickSilver QS1R Reviews: 12 Average rating: 4.9/5 MSRP: $899 + s/h
Description: The QS1R VERB is the most advanced open source digital down conversion (DDC) receiver board on the market featuring a 50Mhz panadapter display (selectable down to 50Khz) and waterfall.

It features a Linear Technologies LTC2208 16 bit, 130 MSPS Analog Digital Converter (ADC) and an Altera EP3C16 Cyclone III FPGA. Connectivity to the PC is through a high speed USB 2.0 interface. QS1R covers 15 kHz through 55 MHz in its standard configuration and can be used in undersampling applications to 300+ MHz.

    QS1R Specifications:
  • - Frequency Range (BNC LPF Input): 15 kHz to 55 MHz
  • - Frequency Range (SMA direct input): 15 kHz to 300 MHz
  • - Input Impedance: 50 ohms
  • - Clipping RF Level: +9 dBm (S9+80db)
  • - Maximum Display Bandwidth: 50 MHz
  • - ADC Sampling Clock: 125 MHz (1 - 130 MHz with external encode input)
  • - I/Q Image Rejection: 90+ dB
  • - MDS (500 Hz): -122 dBm @ 14 MHz
  • - BDR: 125 dB
  • - Voltage: 5 - 6 VDC, 2A fused, reverse polarity protected
  • - Current Draw: 500 mA (typ.)
  • - Connectors: BNC (RF IN LPF), SMA (RF IN, EXT ENCODE CLOCK), USB Type "B", 2.5 mm DC Power
  • - LEDS: Power, Clipping, Debug (internal)
  • - Dimensions: 160 x 100 mm (3.299" x 3.940") (board size)

The QS1R VERB is OPEN SOURCE. QS1R is not a black-box design. The firmware, software, and FPGA HDL are all GPL open sourced. You can view, change, improve, and experiment with what is inside. Since the majority of the VERB's functionality is within the FPGA, a new, updated radio is only a download away.

Yahoo Group:

Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the QuickSilver QS1R.

<— Page 2 of 2

KF1Z Rating: 5/5 Jun 4, 2008 15:47 Send this review to a friend
Wonderfull!  Time owned: 3 to 6 months
The QS1R is really living up to it's growing reputation!

This unit has features that make it stand up to just about any receiver out there...

The panadapter and waterfall display beats anything out there right now.. at a really fine 50 megahertz wide!! (selectable from 50khz to 50mhz sample rate, in several steps)

At the time of this writing, the band-pass filter, pre-amp, attenuator board is not connected...
But during today's 10 and 6 meter band openings.. I was copying many stations on both bands... on my 75 meter antenna!
(NOT through a tuner)

The other day, I was using my Icom R-75, which I had though was a pretty fair reciever...and it is... BUT I couldn't stand to listen to any AM stations on it anymore, and went right back to the QS1R....
The QS1R was actually more sensitive, and produces better audio than the R-75..

The dsp filtering make crowded conditions much more bearable, and the noise filters do a great job of eliminating lightning static ..etc.

I could go on and on about it...

Right now just waiting for the companion transmitter board to be made available ( the QS1T )... that pair will make other "comparable" SDR transceivers feel like toys.

With a software defined radio like this....

"A new radio is just a download away..."

If you've been thinking of taking the next step up in software radio....
This unit is what you're looking for.

Bruce G

N9VV Rating: 5/5 Jun 4, 2008 14:54 Send this review to a friend
Amazing technology  Time owned: 3 to 6 months
The QuickSilver QS1R is truly a Generation-III Software Defined Radio's. Phil N8VB has developed an amazingly straight forward set of chips to bring the HF spectrum from the antenna to the PC. He used a very high speed ADC and the Cyclone-III FPGA to achieve 15khz to 55mhz coverage. The project is Open Source so that anyone can play. Cathy in England has already contributed a beautiful new Graphical User Interface.

Phil has designed the whole PCB so that all buses and interfaces are exposed. He will be creating various add-on boards in the future. Some of the add-on boards are going to dazzle the Ham and SWL fraternities.

A simple server running on a small PC connects the QS1R USB port to the outside world. The server sends and receives it's commands, spectrum data, and s-meter data via TCP/IP connections. This means the QS1R works on your local LAN or directly on a single PC. The entire setup can run comfortably on a 1Ghz mITX 512MB PC.

Join the Yahoo group where you will find loads of images, documentation, Application Notes, and Cathy's GUI binary and source code.

I am looking forward to the new cabinets and new boards that will be available later this year.

This is an amazing time to be in Ham Radio!
73 de Ken N9VV
<— Page 2 of 2

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.