eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antennas: HF Verticals and Wire | MFJ-1796W Help


Reviews Summary for MFJ-1796W
Reviews: 2 Average rating: 0.5/5 MSRP: $$229
Description: 12/17/30/60M WARC Band Only Vertical Antenna
Product is in production.
More info: http://www.mfjenterprises.com/index.php
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-1796W.

W1ZE Rating: 1/5 May 20, 2014 05:03 Send this review to a friend
Not worth the $$  Time owned: more than 12 months
This vertical antenna is not worth the money. For a change from normal MFJ's lack of QC all the hardware was packaged and OK quality. However, assembly is tedious and overall performance is lacking. MFJ says it is a 40 to 2 meter vertical. It does do OK on six and two meters and 10 meters isn't bad but on the lower bands, not so much. You need a good antenna tuner to get it to operate any place on 40 meters. Bandwidth on 40 is very narrow, only a few KHz and the lowest SWR I could get was 2.2:1 after lots of tinkering. It is NOT a keeper.
 
WV4I Rating: 0/5 Feb 24, 2008 17:40 Send this review to a friend
Waste of Money and Time  Time owned: 0 to 3 months
Over the years, I've gotten used to the overall poor quality of MFJ products. No QC. But this antenna hits a new low. I won't waste a lot of time reviewing it, because I've already wasted several hours with assembly.

Instructions reference figures that are not to be found, even on website.

Extra parts that do not have assembly instructions, i.e. spokes of 3 lengths, standoffs.

Poor hole alignment.

Instructions incomplete, like they took MFJ-1796 instructions and attempted to adapt to WARC version.

Poor mechanical design. A portable antenna at best, or perhaps indoors, assuming you want to spend time getting it to work, if it ever would.

My best shot at building this antenna yielded 4.4mhz, and 9.6mhz as resonant pts 1st try. Nothing even close to 12/17m.

We'll see if the dealer or MFJ wants to give me a refund for this pile of junk.

 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.