eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Transceivers: VHF/UHF+ Amateur Base/Mobile (non hand-held) | Icom IC-255A Help


Reviews Summary for Icom IC-255A
Reviews: 2 Average rating: 3.5/5 MSRP: $(missing—add MSRP)
Description: 2m mobile radio from circa 1979.
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Icom IC-255A.

K7NG Rating: 4/5 May 3, 2011 14:32 Send this review to a friend
Built like a tank  Time owned: more than 12 months
I bought an IC-255a new in 1982, had it for about 20 years. It was my primary 2M mobile radio for the first 7 years or so, after that I used it for 2M Packet / APRS and as a backup base station voice radio.
What I liked: Built like a tank.
Good helical resonator filters in the RX frontend - crossmod resistant
Lots of RX audio.
What I didn't like: No memory backup - interrupt power and you have to re-enter VFO and Memory channels.
6 memories. Wasn't enough for use around the SF Bay Area.
Red LED display gets washed out in sunlight.

To make the AUX connector RX audio work with a TNC you have to remove a capacitor across the audio line that rolls off audio way below the 2200 Hz tone of B202 AX.25 Packet.

It's probably still worth $50 - $75 today for a most basic Packet or few-channel voice radio.
 
ZL1RCA Rating: 3/5 May 14, 2009 20:48 Send this review to a friend
Recent addition to collection  Time owned: 0 to 3 months
Purchased at a junk sale. When powered up the frequency display remained at 5.000. Removed the top cover, manipulated all the inline white connectors, no change. Moved the ribbon cable connector immediately behind the display, success! The display now changed with the frequency knob. Performance, will trigger local repeaters but early days yet, will report back.
Just looked up the reviews and there was not one for this radio.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.