eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Interfaces, Radio to computer, amp, rotor, coax switch, internet | Yaesu CT-62 CAT Interface Help


Reviews Summary for Yaesu CT-62 CAT Interface
Reviews: 2 Average rating: 5.0/5 MSRP: $35
Description: CAT Computer Interface Cable for FT-817/FT-100D/FT-897/FT-857, serial computer port to radio CAT port cable.
Product is in production.
More info: http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=8CBB7C4BDBAF40129AD4253A4987523C&DivisionID=65&isArchived=0
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Yaesu CT-62 CAT Interface.

K7DAA Rating: 5/5 Sep 17, 2009 21:04 Send this review to a friend
Well-Built, Works Like it Should  Time owned: more than 12 months
I've used both the CT-62 as well as the West Mountain RIGtalk. I think they're both fine products, although I have a slight preference for the CT-62 because if its construction.

Because of its flexibility in working with multiple rigs, the RIGtalk has a 3.5mm plug sticking out of it. This adds another mechanical connection in line. Although I've had no problems with it, given two fairly equal products, I'll vote for the one with the fewest connections that could come loose or go intermittent.

The problem is that, no matter which interface you use, you may end up with more mechanical connections than you'd wish for:

The CT-62 is a no-nonsense serial interface exclusively for Yaesu products. If you have a newer computer without serial ports, or you are intelligent enough to have purchased a Mac, you have to also buy a USB-to-serial converter, such as a Keyspan USA-19HS or similar. It just plugs in-line with the CT-62. I've used it with a variety of computers, including my MacBook Pro, and everything just hums along nicely.

The RIGtalk eliminates this step of requiring a USB-to-serial dongle, since it incorporates this function inside. This makes the whole computer-to-rig thing a bit less complicated if you are using USB.

As far as the total number of connections goes, the CT-62 wins if you are connecting it to a computer that has a 9-pin serial port. Otherwise, unless you already own a Keyspan or similar adapter, the RIGtalk wins both for the least number of things that plug into other things, as well as for cost.

In my opinion, you can't go wrong with either of these fine products! Which ever one you choose, it's very nice to have the ability to control both my FT-817 and my FT-857 (normally installed in my mobile) with Ham Radio Deluxe. Great combination of hardware and software!
 
KC4RZW Rating: 5/5 Aug 11, 2008 12:28 Send this review to a friend
Radio to Computer CAT Control  Time owned: more than 12 months
This is a very good interface, used on 857D connected to serial port on computer running Ham Radio Deluxe, have complete rig control. Can tune radio from computer and check settings in the menus from the computer.

The only problem that I have had with this interface is its propensity to stop working, have replaced the cable twice to resume operations. There is a automatic level controller circuit inside the serial plug housing that is powered by the computer port that seems to stop working. Not sure why they stop working, disrupts all communication with computer and radio.

This cable is also used for software used to program radio memories from the computer, a big help when you have many frequencies to program.

Makes your radios setting more visible and easy to change, without memorizing the menu setup on the radio.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.