eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Towers, masts, accessories, climbing gear | Wimo Low-Cost Fiberglasmast Help


Reviews Summary for Wimo Low-Cost Fiberglasmast
Wimo Low-Cost Fiberglasmast Reviews: 1 Average rating: 4.0/5 MSRP: $30
Description: 19.69 feet (6 meter) long telescopic lightweight Fiberglass Tower. Pushed together this Tower is only 3.83 ft (1.17m) short. The Top Segment is only 0.15744 inch (4mm) thin, very flexible and on Top of it is a metal loop with a Diameter of about 0.16 inch. The Segments are fixed by pulling and turning them into opposite Directions.

On the Tower itself is the following Information written: Product Barcode 8 032578 592337, Product Code 2060600 Delta Pole, International Pro Serie Delta 600-6, Made in China, imported and designed in Italy by LINEA EFFE S.P.A.

At the Wimo Shop this Product has the Order # 18338.06 and costs 19 Euro, wich is 30 US Dollar plus shipping.
Product is in production.
More info: http://www.wimo.de/framesetp_d.html
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Wimo Low-Cost Fiberglasmast.

DL7ISA Rating: 4/5 Oct 18, 2008 06:46 Send this review to a friend
Does its Duty  Time owned: 3 to 6 months
The only Thing that I dont like is how that Metal Clip was fixed on top of the Mast, it was fixed only by pushing it into the Glasfiber Materiel less than 0.4 inch. I put a wire through that Metal Clip on top of the Tower but the clip EASILY slipped out like nothing when I moved the Tower to the side! I didnt expect there a Clip to be on Top of the Tower befor I bought it but if there is a Clip on Top to put a Wire through, it should be better than this! That Clip on Top has to be at least 12 inch into the Tower to have enough Grip to not Slip out that easy when putting up a Wire! When the Top Segment was flexing to the Side under the weigh of the Wire, the Wire in that Clip on Top simply pulled out the Clip from the Top of the Tower and the Wire fell down to the Groud.

The junk is only on Top, below it the Tower is much better! It fell down several times and the Segment crashed down because I didnt fix them well enough but the Tower didnt break and still does it for me. I hanged a 1/4 Length Wire on it to build a Vertical Antenna for the 20m Band with 3 1/4 Wavelength Radials and had to fix the vertical Wire with Duct Tape on the Top of the Top Segment because of that totaly useless Clip on Top. The Top Segmet is to thin and to flexible to hang a 1/4 Wavelength Wire for 20m on it, that Wire has to be fixed not only on the top Segment but as well on the 2nd Segment too with Duct Tape. All in all this Tower can easily carry a 1/4 Wavelenght Antenna with 3 Radials for the 20m Band. With such a simple 1/4 Wavelenght Vertical Antenna for 20m on this Lightweight Tower I heard on 20m in SSB Stations from Europe, middle East, America and Nothafrica, wich was as much amazing as pleasing. I would rate this Tower 5 but the issue with the Clip I wrote makes me rate it 4.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.