eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Ham radio kits | DDS 0-21Mhz Norcal FCC-2 and FCC-1 Help


Reviews Summary for DDS 0-21Mhz Norcal FCC-2 and FCC-1
DDS 0-21Mhz Norcal FCC-2 and FCC-1 Reviews: 6 Average rating: 4.0/5 MSRP: $(missing—add MSRP)
Description: The FCC-2 is a DC - 21MHz DDS VFO.
The FCC-1 is a highly flexible frequency counter.

Product is in production.
More info: http://www.norcalqrp.org
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the DDS 0-21Mhz Norcal FCC-2 and FCC-1.

KC9KEP Rating: 5/5 Dec 29, 2014 17:55 Send this review to a friend
highly reccommended!  Time owned: more than 12 months
I've mounted the FCC-1 & 2 into a small enclosure and use it frequently as a bench test-oscillator and a VFO for my tube rigs. I can't imagine the amount of effort that went into developing this kit, let alone the firmware for it ;-)
 
K7DAA Rating: 5/5 Apr 30, 2014 16:35 Send this review to a friend
The best digital display and DDS VFO ever produced  Time owned: more than 12 months
I fail to see how a reviewer could say that the product works very well, then gives it a score of 1 because it is out of production. Should we also do this with all Hallicrafters or Hammarlund ham radios as well?

I have four sets of the FCC-1 and FCC-2, and they are by far the best digital display and DDS VFO on the market. The DDS harmonics are very low, better than -50 dB below the fundamental. The FCC-1 counter is very low power, and low-noise as well.

I sincerely hope that the new NorCalQRP group sees fit to bring the FCC-1 and FCC-2 back in the future. These fine kits, as well as all the others that NorCal has done, were discontinued because of the death of Jim Cates, as well as changes that naturally occur in any volunteer organization. They have recently re-organized, and will hopefully be reviving some past efforts, such as these great kits.
 
W5DTW Rating: 1/5 Jul 6, 2012 07:02 Send this review to a friend
Would be good if you could get one  Time owned: more than 12 months
I have used the FCC-1 and FCC 2 for several years and they would well, BUT I have not been able to get another for a couple years now because every time I look they are out of stock, if they are not going to get any more they should just discontinue them so we will stop waiting!!!!!
 
KG8LB Rating: 5/5 Feb 16, 2011 05:16 Send this review to a friend
It Works AND !  Time owned: more than 12 months
It works well . The FCC-1 is a stand alone frequency counter that is quite useful on it's own. Programable offsets and pre-scaling allow you to use this as a freq display with older analog receivers and transmitters. You can program multiple offsets for different bands and applications. They are switch selectable. Add the FCC-2 and you now have a VFO with the same programming power. You can use the VFO in transceive with the required offsets and still display your actual operating frequency . These are PLUSSES not MINUSES when scoring this fine product. The surface mount components make for a solid, compact package as well as holding the cost down to a very reasonable level.
The reason the counter (FCC-1) is offered seperately is because it has uses as a stand alone counter. You can then ADD the DDS VFO if you have an application for the FCC-2. Nothing radical or non-sensical there.

I have built 6 of the FCC-1 and a pair of the FCC-2. They are well worth buying when NorCal offers them up.

All in all this is a very good package that can also serve as a basis for an excellent signal generator. The individual offerings allow the buyer to buy only what he needs.
 
KC5EJT Rating: 3/5 Jan 3, 2010 09:36 Send this review to a friend
Works But?  Time owned: 0 to 3 months
There are lots of SMT parts, I don't know why the simple R's and C's have to be surface mount. I understand that the DDS chip is only avaiable that way, but the other parts could be through hole.

But with some help from my grandson, who has better eyes and a steady hand, we managed to get it together, and working.

Also I am quite puzzled as to why it is sold as an accessory to a frequency counter?? This is quite confusing. There is no need for a frequency counter when you have a DDS, the DDS simply generates the frequency you ask it to generate and thats that. But for some confusing reason, you have to get thier frequency counter kit, then add this DDS.
 
KD7RDZI2 Rating: 5/5 Dec 8, 2008 04:52 Send this review to a friend
quality product  Time owned: more than 12 months
although the frequency range is limited to 21Mhz for the FCC-2, the kits FCC-2 and FCC-1 are easy to assemble and work very well indeed.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.