eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Amplifiers: RF Power - 6M/VHF/UHF+ | Mirage B-3016G (older unit) Help


Reviews Summary for Mirage B-3016G (older unit)
Mirage B-3016G   (older unit) Reviews: 1 Average rating: 4.0/5 MSRP: $(missing—add MSRP)
Description: 2 meter solid state. Max 50 watts drive, 160 watts out.
Use on SSB, FM, AM following correct drive levels.
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Mirage B-3016G (older unit).

KM3F Rating: 4/5 Jan 28, 2009 22:56 Send this review to a friend
Good unit if reasonable efforts are made to drive it within it  Time owned: 0 to 3 months
This unit is an older original mfger design without the latest design improvements from MFJ.
The pre-amp in not a low noise design but does work reasonable when the circuit is peak tuned.
My unit is well assembled.
Power out is as rated with 30 watts drive.
13 volt power in current is rated at 30 amps max.
Can be remote controlled with a BC-1 control head.
The trick to running these amps is not to overdrive in any mode.
FM about 30 watts. SSB about 10 to 15 watts peak.
AM about 15 watts.
There are technical reasons these values are a spec.
For example, 10 to 15 watts on SSB have peaks of about 30 watts depending on the voice and any compression used. This makes for the 30 watt/160 watt output spec.
Good amp if used in a reasonable manner and not overdriven to kill it or cause band splatter.
If replacing this unit, I would want the later Mirage design with it's auto bias and guard circuits.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.