- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF Directional: Yagi, quad, rotary dipole, LPD, etc | Hexbeam: by K4KIO Help

Reviews Summary for Hexbeam: by K4KIO
Hexbeam: by K4KIO Reviews: 111 Average rating: 5.0/5 MSRP: $669
Description: A six band, broadband, G3TXQ- designed, hexagonal beam with performance on par with a two element Yagi but a much smaller physical footprint is fully tuned and ready to go. This is a plug and play antenna, not a kit. It can be assembled in an evening with no measurements or tuning needed. No traps or coils are required and a single coax feeds all bands. Available for Bands 20 – 6 meters in various combinations. All steel components are stainless and non metallic components are UV resistant. Mount on a push up mast or rooftop. The sturdy aircraft aluminum base plate has never been reported to fail by hundreds of users. A “no questions asked” 30 day refund offer comes with each beam.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Hexbeam: by K4KIO.

Page 1 of 12 —>

N5WRX Rating: 5/5 Jul 29, 2014 18:56 Send this review to a friend
Great antenna ...  Time owned: 0 to 3 months
I was looking for a multi-band antenna to place up on my tower that is between my house and the next door neighbors.
The small footprint of the hexbeam made this a logical choice.
I ordered the 20 - 15 - 10 - and 6 meter bands and got it all up this morning.
It works great.
Very quiet as compared to my A4S beam at the other end of the house where I have more room.
As a bonus it is resonant on 2 meters as well.
Dont know why but it is.
Dont tell K4KIO or they will what to charge for an extra band! ... LOL.
Dont be afraid to try one of these antennas ... it would be an easy project to repair any failed parts many years down the coax.
I give it a 5 because of its ease of assembly, high quality parts, and its great performance.
VE8AP Rating: 5/5 Jul 27, 2014 15:29 Send this review to a friend
Been an awesome antenna  Time owned: more than 12 months
My 2nd review of this antenna and I moved from Yellowknife to Northern Alberta for awhile it was so easy to take the antenna down and transport it to my new QTH I almost want to take it camping with me great portable antenna I bet.
I can go on and on about this antenna 100mph winds we had in Feb not a problem in the least. I won't say I won't buy another antenna I am sure most ham's are like me always wanting the latest and greatest or just a change keep them Playing. Take care care all and K4KIO great antenna hands down deserves to be at or near the top.
WB9KPT Rating: 5/5 Jul 26, 2014 14:59 Send this review to a friend
Great Antenna and Company  Time owned: 0 to 3 months
I'm very pleased with this antenna. I can easily make contacts, and often break through pileups on the first or second try - running barefoot with my IC-7600. The antenna was simple to assemble with no missing parts. I ordered the larger base, and the hardest part was drilling the hole to prevent twisting on the mast. The SWR was as advertised - with no tuner required on any bands. Very fast response from Leo with any questions.

Count me as another satisfied customer. You can see the install on my QRZ page.
N7LVS Rating: 5/5 Jul 13, 2014 06:19 Send this review to a friend
Great Antenna  Time owned: 3 to 6 months
This is a very, very , easy antenna to build. It is very well engineered and thought out. I put it together in about an hour. I mounted it 30 feet off the ground, on top of my RV barn, by myself. It is light but very hard to manage by yourself. I highly recommend two people.

All bands are used without an antenna tuner and works very well. I am constantly amazed what this antenna will pickup. I am new to HF so I don't have anything to compare it to but I don't see how you can go wrong with this antenna.
W2RMS Rating: 5/5 Jun 20, 2014 07:27 Send this review to a friend
Awesome antenna and service!  Time owned: 3 to 6 months
This is my first directional antenna so i have nothing to compare it to. Ordered it few months ago. It was sitting in the boxes until around March of 2014. Assembled it first in the back yard. Using Glen Martin 4.5 foot roof tower and a 5 foot mast. So around 10 feet off the ground. Tested it with my MFJ-269 and it was mostly below 1.4:1 on all six bands! Took it apart, painted the spreaders with olive "military" color paint for UV protection as well as "blend-in" factor. Put the roof tower on my roof (3-story semi, about 30 feet up). So the antenna is now around 40 feet off the ground. Assembled it again on the roof (around 40 minutes with a friend of mine). SWR may have changed a bit on some of the bands but it is still below 1.6:1 everywhere and 1:1 on few bands. I have a picture on my QRZ page if anyone is interested.
Due to the painting of the spreaders the antenna is completely invisible at night. I actually thought that it was stolen the first night after final assembly because i looked up and it wasn't there. I'm using it with the Elecraft K-Line. Before i bought the KPA500 i was running with just a K3/100 and usually the first question from a DX station was: what amp are you using?
In the wind it seems to just sit there. I have a 10m vertical aluminum antenna 18 feet away from the HexBeam and its painful to watch it in the moderate winds.
I'm using am older CDE HAM IV rotator which i upgraded with an ERC board for RS232 capability. Controlling it with HRD is simply awesome. Point and click. It sure is an overkill for this very light antenna but i already had the rotator.
Service from Leo is unbelievable! I've gotten e-mail replies from him on a Saturday, 5-10 minutes after i sent it!
All in all its an amazing package, especially for someone with real estate restrictions.
KA4MAY Rating: 5/5 Jun 11, 2014 05:51 Send this review to a friend
Complete Satisfaction  Time owned: 0 to 3 months
I purchased the 5-band Hexbeam with the 6-meter option in May of 2014. I chose this product for the following reasons: 1) I live on a lot with large trees that do not have enough clearance for larger antennas, and 2) It represented the best value for the gain, front to back ratio, and bands provided for the dollars spent.

When the unit arrived, I was impressed with the care that the components were packaged and organized. I took my time with the assembly, which was very easy due to the quality of the instructions.

I placed the hexbeam on my 14-foot "test pole" and was pleased with the SWR curves on all bands from 20 through 6 meters. On-air testing and comparisons with my Butternut vertical within minutes demonstrated that while the gain of this antenna is not overpowering, on reception, rejection of signals from unwanted directions is outstanding. Even at this low height, DX from many areas of the world previously inaccessible to me have been easily placed into my logbook.

The only caution I can pass on to potential buyers is that if you are using a non-standard mast size, as I have, a little ingenuity will be necessary to securely mount this antenna.

Support via e-mail has been outstanding, all my questions before and after purchase have been quickly and thoroughly answered.

I am very happy with this product and enthusiatically recommend it to other amateurs with space limitations.

Thank you,
Mark, KA4MAY
W5NRF Rating: 5/5 Jun 6, 2014 07:36 Send this review to a friend
Doing is believing  Time owned: 0 to 3 months
After working off a (good) dipole, often trying without luck to contact a DX station, I wanted a beam antenna. A week of diligent research which included these reviews led me to the KIO, not the cheapest or most expensive Hexbeam, because of positive comments about their company.

I'm one of the over-the-hill "boys", but I assembled it by myself in 3 or 4 hours, then had help putting it and a rotator onto a 34' Rohm telescope. Guying with Dacron cord 4 X 3 with roof eve difficult but very important.

Within the last 4 days and some 15 hours total, often with poor band conditions, I have talked to, newest first: Brazil, Puerto Rico, Ireland, Kuwait, Belgium, Spain, Austria, Bulgaria, Nicaragua, Greenland, Japan, Croatia, Romania, Italy, Slovenia, Russia, Lebanon, Jamaica, New Zealand, Argentina, Cuba, Poland, and Jordan, and many US stations. A 756PRO and 400 watts.

I don't know how it works, above my pay grade, but I suspect it is magic. It blew me away, and you won't find any company easier to work with.
K8BZ Rating: 5/5 May 29, 2014 17:16 Send this review to a friend
All reviews are Spot On!  Time owned: 0 to 3 months
This antenna meets and in most cases exceeds all of the claimed assembly, specifications and performance. I purchased the 6 band version with 6 meters included. Assembly was completed without assistance in about 2 1/2 hours. The antenna was tested on the ground with an antenna analizer and had good center of resonance and reasonable band width, although not necessarily in band centers, but it gave me confidence that it would be fine when mounted on the tower.

This antenna replaced a Cushcraft A3S, 3 element tri-band yagi that gave me good performance for 9 years. After the antenna change I found the MAXIMUM SWR ACROSS THE BAND, as follows:

20 meters 1.3 to 1
17 meters 1.4 to 1
15 meters 1 to 1 across the entire band
12 meters 1.2 to 1 across the entire band
10 meters 1.4 to 1 from 28.005 to about 28.300 and a flat 1 to 1 for the remainder of the band.
6 meters 1 to 1 from the low band edge and did not raise to 1.5 to 1 until reaching 51.370 Mhz.

The KIO Hex beam has a great deal more rejection of signals off the side and back of the beam than the A3S. The difference was more than slight. With the A3S, if a signal was S-2 off the front of the beam I could usually count on at least hearing the signal from any other side or back of the beam. Not so with the Hex. There are sharp nulls at 90 and 180 deg.

In the 5 days since this antenna went up here is a small sampling of stations worked:


Some of the above had decent pile ups calling and I had no trouble getting through. I use an amp but most of the above were worked at 100 watts.

I have a 1.5 KW tuner that I can completely bypass on 20 through 6 meters with the KIO Hex Beam.

I have found the reviews to be very helpful when considering a major purchase. I read most of the reviews of the KIO Hex beam before I made the pruchase and I was expecting a good performing antenna just based on the reviews I read. It's not often that I can say I was "blown away" by the performance of a product when I had great expectations in the first place. But I was "Blown Away".

When I first started seeing photos of these antennas showing up on pages I thought they were the pretty ugly. But I have a whole new appreciation for them now and I'm getting quite used to the goofy looking things.
K4ELO Rating: 5/5 May 4, 2014 14:46 Send this review to a friend
Bargain antenna  Time owned: 0 to 3 months
I have to thank Leo for an excellent product. Simple to assemble with quality parts. Built it a few weeks ago and finally got it up today.

My other antennas are 2 super loops at 45'. The hex beam is at 36'.

On 17M today listening to EU stations. They were 4 to 6 S units stronger on the hex beam compared to the loops. Weak EU stations on the hex beam were not even heard on the loops. Plus, the hex beam is quieter on rx than the loops.

Maybe half the gain of an expensive beam but a small fraction of the cost. I'll be working more dx now.

KY6N Rating: 5/5 Apr 20, 2014 12:19 Send this review to a friend
Great! and good value.  Time owned: more than 12 months
I am a very happy customer.

The K4KIO Hex beam is so simple to assemble that I had one of my maintenance employees put it together while I was working on the rotor.
The employee had never seen a Hex or any other beam. I handed him the box, as received, and said "just follow the instructions".
In a little over an hour he had it all together. We did some final adjustments to balance out the arms, tightened all screws and it was ready to go up.
It required no cutting or drilling and no radio related skill....I put it up and it worked perfectly on every band.
Doesn't get better than that....
...and I have worked the world with it.
I have had big towers and long boom mono band beams.....yes, they work better....but the cost and work to put them up and keep them up is huge.
All in all, for a minor amount of money and effort I think the K4KIO Hex beam is great.
It is also a low visual impact antenna. If it is located among or near almost disappears.
Page 1 of 12 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.