- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Transceivers: VHF/UHF+ Amateur Base/Mobile (non hand-held) | SOMMERKAMP FT-220 Help

Reviews Summary for SOMMERKAMP FT-220
SOMMERKAMP FT-220 Reviews: 1 Average rating: 4.0/5 MSRP: $(missing—add MSRP)
Description: 2m SSB/CW/FM 10W base transceiver, mid '70s vintage (a YAESU FT-220 product)
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the SOMMERKAMP FT-220.

PA0FRI Rating: 4/5 May 10, 2009 05:01 Send this review to a friend
Old goodie  Time owned: more than 12 months
A Yaesu FT220 was around 1974 on the market. It is a 2 m, 10 W, FM, CW, LSB and USB transceiver with built 100-234 VAC (or 13.8 V external) power supply. A Swiss importer Sommerkamp in Europe distributed the 25 12.5 29.5 cm (w h d) 8.5 kg heavy box as SOMMERKAMP FT-220. Facilities such as VOX, RIT, RF gain control, CW monitor NOISE Blankers, repeater shift, 1750 Hz tone, etc. are present. The transceiver is built with a separate PCBs that can be easily removed by connectors and four screws.
This beautiful set has a VFO from 8 to 8.5 MHz and using a premixer system, the incoming signal is converted to an IF of 10.7 MHz. The range of 144 to 146 MHz is in four steps from 500 kHz implemented. Programming of 16 fixed channels is possible with 4 crystals (optional). For SSB, a 10.7 MHz crystal filter (300 - 2700 Hz 3dB) is used. For FM a 10.7 MHz (10F30A) crystal filter (XF301) and a conversion to 455 kHz followed by a 455 kHz (CFM455D) ceramic filter (CF301) of Murata. Last two filters are too wide for the current 12.5 kHz channel raster. The scale drive is still good old-fashioned run with 8 gears and a drum. The frequency reading of the linear (drum) scale is surprisingly good. An accuracy of 500 Hz is possible. Scale marking is with an internal 100 kHz calibrator creating harmonics on the 2 m band. The internal VFO appears to be more stable than the 100 kHz marking oscillator due to the wrong place of the unit in the cabinet.
Too bad that the repeater shift differs from that in practice. By pressing RPT the reception frequency shift 600 kHz up while the scale stays on the input frequency.
For the Dutch readers see mods:

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.