- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Receivers: Vintage amateur | Gonset G-63 Help

Reviews Summary for Gonset G-63
Gonset G-63 Reviews: 2 Average rating: 4.0/5 MSRP: $239.50
Description: HF+6M Amateur Band AM/SSB/CW Receiver

Produced around 1961
11-tube ham band-only double conversion communications receiver
Turret-type band display shows one band at a time
Features a product detector and Q-multiplier
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Gonset G-63.

K9SUL Rating: 4/5 Jun 10, 2016 15:30 Send this review to a friend
Nice early 60s receiver  Time owned: 0 to 3 months
The G-63 was produced in 1960-1961. This is the best desktop ham band receiver produced by Gonset. Others are either single conversion or cut-down double conversion general coverage.

It is natural to compare it with the earlier mobile receiver, the G-66B. The organization is very similar, but the G-63 features a Q-multiplier and a product detector.

In the CW/SSB mode, the AVC does not work and the RF gain control is engaged instead of AF gain. This is a bit disappointing given that it has a product detector. The AM detector (1/2 6AL5) is also working as an AVC detector. A simple mod might make AVC and s-meter work in CW/SSB.

The sensitivity of the upper bands is lower than ideal but acceptable. When the IF transformers are aligned per manual, its selectivity is quite good. With the Q-multiplier at its lowest setting, sideband reception is quite enjoyable. The Q-multiplier is especially helpful in CW. The stability of the G-63 is excellent. The dial calibration is acceptable after alignment.

AM signals sound good on this receiver, but some might find the bandwidth is a bit narrow.

In standby, instead of cutting B+ supply return path as in G-66B, it simply cuts off the speaker. A 1/2W 27 ohm resister is always connected to the 2ndary of the audio output transformer, so it won't get fried.

Although it is still quite usable and enjoyable, the G-63 falls short of Drake 2-A and RME 6900, which were also released in 1960.
KG4LLQ Rating: 4/5 Apr 30, 2011 12:27 Send this review to a friend
Excellent Vintage Receiver  Time owned: 0 to 3 months
I just finished refurbishing a Gonset G-63 receiver which was purchased at a Hamfest in March 2011.
The receiver was in good condition when purchased although the cabinet was in poor condition.
I sanded, primed & finish painted it with a hammer-tone Rustoleum paint.
Reception is excellent & comparable to my Icom 703. It also has a selectivity control which helps with QRM as well as an effective Xtal Calibrator.
For it's vintage it is a very good ham band only receiver.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.