eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Microphones | Cascade Fathead II Ribbon Microphone Help


Reviews Summary for Cascade Fathead II Ribbon Microphone
Reviews: 1 Average rating: 5.0/5 MSRP: $$219.00
Description: The Fathead II is one in a complete line of US assembled high-quality ribbon microphones. For those using audio chains with a preamp this microphone comes in a well cushioned case with a shockmount.
Type: Ribbon (velocity) Microphone
Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
Polar pattern: Figure 8 Symmetrical
Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
Frequency response: 30 to -18,000 Hz (+/- 3dB)
Output Impedance: <=200 Ohms
Recommended load impedance: >1000 Ohms
Max.SPL (1% THD @1000 Hz): 165 dB
Connector: 3-Pin male XLR
Size: Diameter: 3? (O.D. grill), overall length 7 3/4"?, 1 3/4" (O.D. body)
Product is in production.
More info: http://www.cascademicrophones.com/cascade_FAT_HEAD_II.html
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Cascade Fathead II Ribbon Microphone.

KG6YV Rating: 5/5 Jul 10, 2009 14:22 Send this review to a friend
Excellent articulate but warm audio for a reasonable price.  Time owned: 3 to 6 months
This high quality ribbon microphone looks like a 21st century son of the D-104 "on steroids".

For those who have audio chains including a mic preamp the Cascade Fathead II is a real steal. It is a very well built ribbon microphone which provides all the best features of a ribbon at a very reasonable price.
Ribbon mics usually offer very rounded warm audio with a very natural and articulate high end. Their audio is very transparent and neutral without the "artificial" high-end typically found with large condensers.

The Fathead is my second ribbon. Before ribbons I tried large condensers (Shure KSM32, Marshal V63M and Marshal XL990). While the condensers are OK they were noticably "sterile" especially in the high end.

I currently use the FatheadII on my Yaesu FT-2000 and FT-1000D. I also tried a Nady RSM-2 which was a good ribbon but it lacked the nice articulation in comparison tests with other hams on 75M.
My FT-2000 is set for 3.6khz BW and I don't use the FT-2000 EQ at all. The FT-1000D has Inrad 2.8khz filters. For both radios I use a Behringer preamp, Behringer 1502 EQ and T-1952 Tube Composer compressor/limiter/gate.
In on-air tests with various roundtable groups I continue to get reports of "very clear, balanced and natural" audio. Most of the people listening have heard the other mics mentioned here in this review on the FT-2000 over the last year and they give the Fathead II the top score, no contest.

I get similar reports on the FT-1000D albeit with a slightly narrower BW.
BTW, I put all the other microphones up for sale....



 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.