- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF Mobile & Accessories | Ameritron SDC 102 Help

Reviews Summary for Ameritron SDC 102
Ameritron SDC 102 Reviews: 12 Average rating: 2.7/5 MSRP: $129.00
Description: Screwdriver Controller
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Ameritron SDC 102.

<— Page 2 of 2

KQ4KK Rating: 5/5 Sep 5, 2010 14:43 Send this review to a friend
Spot on. Works as Advertised  Time owned: 6 to 12 months
I have installed 2. The first one was in our County EOC HAM trailer with a large Tar Heel. The County bought the whole package from the TarHeel Dealer, so the right 4 pin connector was on the end of the controller. Plug and play. Used a MFJ 259 analyzer to get the correct turn readings before keying up the radio. Just make sure you "zeroize" after use. Then the next time the counting is correct. Sometimes you might have to hit the up or down button for a less than one turn correction, while watching the SWR meter on the HF.
Liked the controller so much, I bought one for my own Little Tarheel 2 on my van. Replacing a trouble prown TurboTuner(which I've had for years). I bought the SDC102 from a dealer OTHER than the TarHeel dealer, so I had to add the 4 wire connector to the controller. Not quite plug and play(solder and play). The TarHeel Manual gave the correct Trip Current setting to use for the SDC-102, and the SDC manual gave a warning to make sure you set it correctly. Again, used a MFJ 259 to get the turn counts for the freqs I use. Second one works as well as the first. I like the ability to "fine tune" the screwdriver setting, watching the SWR meter on the HF. With the Turbo Tuner, you you are SOL if it is having issues.
WB9SFM Rating: 2/5 Oct 1, 2009 08:33 Send this review to a friend
Needs better Manual  Time owned: 0 to 3 months
The Ameritron SDC 102 is a antenna controller for screwdriver based antenna (s) with some limitations. The manual does not define exactly what Ameritron recommends (voltage settings)for any particular screwdriver antenna. Ameritron does not give you the connector (for example) for molex wire configurations (tarheel antennas). Purchase the controller from WB0W and they will give you the connector. Ameritron needs to give better instructions on Menu configurations (i.e. Trip current, The unit I purchased would send 12v but would not trigger the counter to advance, thus trying to make memory settings of frequency adjustments a no will situation. The unit will raise and lower the antenna but I found the controller with faults. A over-priced switch.
<— Page 2 of 2

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.