|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
|
You can
write your own review of the MFJ - 1702.
|
KE4SWC
|
Rating: 5/5
|
Sep 21, 2011 10:34
|
Send this review to a friend
|
|
Works great
|
Time owned: more than 12 months
|
I've used this switch to connect a 2m/70cm antenna between two radios for several years. I only run 100 watts max through it, but it works fine nonetheless.
It still has a firm kerchunk between positions.
|
|
NZ5L
|
Rating: 5/5
|
Jul 5, 2010 17:29
|
Send this review to a friend
|
|
Works great.
|
Time owned: 3 to 6 months
|
|
I have only had this switch for 3 months, but it is rugged and works fine. A detent position between "A" and "B" grounds both. Could not ask for more, especially for $19.95. Try one.
|
|
KI4VFX
|
Rating: 0/5
|
Nov 27, 2009 15:55
|
Send this review to a friend
|
|
Only the B Side of the switch works.
|
Time owned: 0 to 3 months
|
I purchased the MFJ-1702 2 position coax switch from MFJ Enterprises via website order. The switch arrived fine. I hooked it up and the A side of the switch worked one time. After that it would not work at all. The B side of the switch worked fine.
I wish someone had posted a review of this switch before I purchased it. This is the worse antenna switch I have everyone purchased. Even the antenna PL-259 did not fit the connector without having to force it into the hole. I almost broke the prong on the PL-259. I did not have any problems with the same connector when I hooked it to 3 other devices. It was like the hole for the PL-259 was too small.
Do not purchase this Switch.
|
|
If you have any questions, problems, or suggestions about Reviews,
please email your Reviews Manager.
|
|
|
|
|
