- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Yagi, Quad, Rotary dipole, LPDA | Hexbeam: G3TXQ by MW0JZE Help

Reviews Summary for Hexbeam: G3TXQ by MW0JZE
Hexbeam: G3TXQ by MW0JZE Reviews: 82 Average rating: 5.0/5 MSRP: $£475.00 + Shipping
Description: Description: A six band broadband Hexagonal Beam Antenna designed by Steve G3TXQ and manufactured in the UK by Anthony MW0JZE. Comparable performance to a full size two element yagi on bands 20M – 6M with no tuner needed! Antenna is made in a pre-assembled form meaning a quite assembly time with no tuning involved, just assemble and mount to your mast. Full spec can be found on Anthony’s web site Price £475 GBP plus shipping
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Hexbeam: G3TXQ by MW0JZE.

<— Page 3 of 9 —>

GM0FGI Rating: 5/5 Feb 4, 2015 11:14 Send this review to a friend
Excellent  Time owned: 6 to 12 months
For many years used home constructed VK2ABQ wire beam but got fed up of remaking each spring after winter storms. After research decided to purchase MW0JZE's Hexbeam just over a year ago.
Very easy to construct lightweight yet strong. First year's impression was that performance was marginally better on 20m and 15m than VK2ABQ but got an additional 3 bands and much better performance on 10m. Has withstood weather conditions at my seaside location until January this year when winds recorded at 6ft were up to 50km/hr, so would have been much higher at hexbeam height, caused 10, 15 and 20m elements to flap in the wind. Closer inspection showed that the elements had not fractured but that the nuts holding the elements on to the centre post had come off. Ant provided me with spare nuts and serrated washers to reduce vibrations. The elements have now been re-attached and we are back in action.

VK6WB Rating: 5/5 Dec 24, 2014 17:17 Send this review to a friend
QUAAAALITY ...  Time owned: more than 12 months
I bough this antenna about 14 mount ago, but have not install till 24/12/2014, as I have HEX Beam made by K4KIO still on the mast. I take K4KIO down
and make some comparison ..and what a lots of deferent in quality material, its miles apart. and
Vswr on this MW0JZE lots better then K4KIO.
Thanks To Antony such high quality product and perform really well. I will buy another one for spare.
M6GOM Rating: 5/5 Dec 23, 2014 03:57 Send this review to a friend
A year on still going strong  Time owned: more than 12 months
I've had mine well over a year now and it still looks like the day I put it up. The tuning hasn't moved, there's no signs of any splintering in the arms and it just looks like it did when I put it up in the air.

Over the last year its stayed up at 10 metres height during gales where we've had gusts of over 70MPH and its taken them in its stride. In fact I've been more worried about the mast than the antenna.

Performance has been great. W2YP 5/5 with just one watt on 20m SSB, I've also bagged Argentina - 7500 miles - on 17m SSB with 1 watt. Front to back rejection is good as well and its nice being able to silence the wall of Europe. Here's a Youtube video of me getting through a pileup to AU3NIAR, 4155 miles away, on 10m with a President Lincoln 10m set with just 21W:

Here's another where I busted a pileup to Indonesia to a portable station, over 7600 miles, barefoot 100W whilst the antenna was just up at 20ft getting 5/9+10dB report!!!!!

Ant is currently in the process of developing a 7 band Hexbeam which will add 40 metres but unfortunately it will be too large for my QTH or I would have no hesitation in buying it.
VK5SA Rating: 5/5 Dec 2, 2014 13:16 Send this review to a friend
Fantastic  Time owned: 0 to 3 months
Ant supplies everything needed, and assembly is logical and quick.

It is of heavier-duty construction than you would expect from reading about it, and all components are purpose-built for this antenna.

VSWR bandwidth in my installation is all of 20/17/15/12m.
My internal ATU (IC-7410) cuts in at around 29.2MHz, and I cover all of 50MHz at less than 2:1 VSWR.

Initial on-air results are very promising, with solid S9+ signals both ways long-path to Europe and the US/Canada on 20m, when I could just barely hear the stations on my 10m vertical.

Local noise is reduced, too.

I have a very small yard, so even a 3-element tri-band yagi would not fit, and the Hexbeam just fits, hence the decision to purchase.

I am glad that I was forced to go this way, as performance is great, and I have the added bonus of 17/12/6m.
UA9CDC Rating: 5/5 Aug 21, 2014 11:15 Send this review to a friend
Very nice and reliable  Time owned: more than 12 months
I have had this antenna up for more then two years now. Quality is excellent. Putting it up took less then one hour. No tuning were required. Front to back ratio is well over 20db. The antenna has withstood winds, snow, temperatures below - 30 C and even ice storm. I have made well over 50 000 QSO in many contests during this period of time and sure can recommend this antenna as the second antenna for SO2R or as the main antenna for those who wants light weight and easy to handle beam covering 6 bands with only one coax.
OK1BIL Rating: 4/5 Jul 30, 2014 10:05 Send this review to a friend
Excelent build quality  Time owned: 0 to 3 months
The Hexbeam was lent to us for the MJ0ICD DXPedition to Jersey island. I was very suprised with the ruggedness of the antenna - forget about fishing poles, this is made of ~3mm wall plastic pipes and the mounting plate is a factory made heavy duty aluminium. I would put this on a permanent mast at home without any concerns. The only drawback we had was the insluators on two bands which did not withstand some corona while transmiting. I would personaly change the insluators for some PTFE. But still very good antenna.

We had a chance to compare this with Spiderbeam: Spiderbeam is made of fishing poles, is twice the size, half the gravity, about the same weight in total. Performance-wise the Spiderbeam seemed to be superior to Hexbeam as it has more than two full size elements on most of the bands. On the other hand, the footprint is big and I really cannot imagine using Spiderbeam as a permanent antenna. Great thing about the Hexbeam is that it can be set up in less than 30 minutes if you already assembled it before and you know what you are doing - complete opposite of the Spiderbeam - it takes few hours to get the thing up in the air.

Another thing what I like about the Hexbeam is the 6m option. Although only 2 elements it is essentialy a free extra which can get handy if you do not have a 5 element yagi for 6m laying around.

What I have to point out is communication with Ant, MW0JZE. It has been a great pleasure - nothing is problem for him!

GI0JHR Rating: 5/5 Jul 12, 2014 10:01 Send this review to a friend
175 New Countries in 6 months  Time owned: 6 to 12 months
THE HEXBEAM by MW0JZE. I have had it now for 6 months so this is an update. I got DXCC in confirmed countries last week but I have just today worked my 175th country and need 3 states for WAS. I have a small garden and the Hex is only up 35 feet! Being only a weekend DXer I wish I had more time for the hobby. The results from the antenna speak for themselves. Ant (MW0JZE) is happy to answer questions long after the sale has been made. Excellent after sales service.

Harry GI0JHR
ps Look at the map at the bottom of my QRZ page to see all my contacts
ON5PDV Rating: 5/5 Jul 11, 2014 23:41 Send this review to a friend
Extraordinary antenna !  Time owned: 0 to 3 months
It is for sure no coincidence that you hear more and more people working with a Hexbeam, they are truly remarkable antennas. I've replaced my 3-element yagi (Hy-Gain TH3-MK4) for a 6-band broadband Hexbeam (design G3TXQ by MW0JZE) and I'm extremely satisfied with the results. To be able to work all 6 bands with high efficiency (and good SWR without the use of a tuner) results in very strong signals worldwide. I can't remember to have received signals from US West Coast or Japan coming in that strong, on my previous yagi. The built quality is very solid, and assembling the antenna is easy as everything is pre-drilled, cables are at length, pieces are labeled and Ant has nice videos demoing the installation. It took me 1,5 hour, taking all the time of the world. I would recommend the Hexbeam to anybody being able to put up an antenne 6,5m wide. Mine is installed 9m high, but I'm confident you can get good results at lower heights as well. It's the best investment if you are into HF, if large HF beams are not an option due to space or budget restrictions
M0RCX Rating: 5/5 May 29, 2014 00:39 Send this review to a friend
Well Built & Excellent  Time owned: 0 to 3 months

There are so many reasons for purchasing an Antenna that is fit for purpose and tailored to your individual operating circumstances. I recently flew out to Mauritius and required a lightweight yet effective directional antenna that I could use of HF and 6 meters. After much research and reading of similar reviews I opted for the Hexbeam Antenna.

Prior to purchase I contacted Anthony MW0JZE and discussed size and weight constraints for carriage on Civilian Aircraft and I was pleasantly surprised that the whole antenna shipped would fit nicely into a padded snowboard bag and conformed to Airline Baggage Size regulations.

On arrival at my destination I was particularly impressed with the build quality and attention to detail that Anthony had put into this product and have to say it simply was first class.

Assembly was a breeze and made straight forward with the informative assembly videos provided on his web site.

A check with an analyser prior to placing on the mast showed the antenna resonant and SWR as advertised and thats with me stood between the elements. Up in the air it was even better.

Again restricted by weight constraints I had opted for a lightweight TV rotator to turn the beam and was again incredibly impressed that the antennas's lightweight build rotated effectively on such a device.

Initial checking of the antenna were made switching PSK on to 20 metres and the whole bandwidth came alive with sharp strong traces which I was unable to achieve previously using wire antennas.

Propagation was not at It's best during my time QRV but despite this the MW0JZE hexbeam provided solid contacts to the majority of the world.

In summary the antenna is extremely well built, it is lightweight, it is almost a plug and play resonant antenna, the pre order and post order customer service from Anthony is exceptional.

I would certainly recommend purchasing one so much so that I have left mine in Mauritius for another local HAM to use and I am purchasing a second later this year.

EA3EWO Rating: 5/5 May 28, 2014 10:06 Send this review to a friend
Excellent  Time owned: 0 to 3 months
I had the Hexbeam from Ant MW0JZE and had it on the ground, built and waiting for a Hiab to arrive to install on my mast (easiest option)I worked JP7BNO on SSTV from four feet off the ground.
I always thought my 80-6 Windom was good, but the Hex surpassed all, just no comparison.
Easy to build, back up from MW0JZE second to none, I cant fault it, six broadband HF antenna, EXCEPTIONAL.
<— Page 3 of 9 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.