- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Tools & Test Equipment for the amateur radio work bench | HP 3586C Selective Level Meter Help

Reviews Summary for HP 3586C Selective Level Meter
HP 3586C Selective Level Meter Reviews: 4 Average rating: 5.0/5 MSRP: $11,000
Description: Sensitive, Selective Receiver and meter
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the HP 3586C Selective Level Meter.

W3VVV Rating: 5/5 Jun 15, 2014 20:49 Send this review to a friend
Lots of function for the money  Time owned: 0 to 3 months
An impressive piece of HP hardware when it came out in 1980 (or thereabout) and sold for about $11,000 per unit (in 2014 dollars, that would be $31,250), and even more impressive at about $275 today for a good working unit on Ebay.

There are actually three versions: A, B, and C and several options for each. The best version for ham radio is the 3586A with Option 001. (The crystal oven option is also nice, but somewhat rare.) The A model with option 001 model gives you the greatest number of functions that are applicable to ham radio and provides a 75 ohm BNC input on the front panel. The 75 ohm input (on the 3586A with option 001) is no problem because you just use a T-connector to attach a 50 ohm dummy load, along with the 50 ohm coax from the device that you want to measure, and set the instrument input impedance to 10,000 ohms using the front panel switch. In this way, the input impedance ends up being about 49.75 ohms, which is fine for nearly any use. You'll also need to set an offset from the front panel to cause the dbm readings to be correct for 50 ohms.

The C model gives you a 50 ohm BNC (instead of 75 ohms) on the front panel, but has less function overall that the A or the B models.

These units have a NiCad battery on the power supply board that maintains the settings when the unit is powered off. The battery will surely have leaked by now if it hasn't been replaced by a previous owner. In some cases, the leakage may have damaged the power supply board. When you are looking at buying one of these units, ask the seller if the battery has been removed. If it hasn't been removed, ask him to pull out the power supply board and check for leakage and damage to the power supply board. If there is leakage and the unit is working, it can be saved from further damage by removing the battery, cleaning the leaked material from the board, and then installing a new NiCad battery. Or better yet, it's easy to route a pair of wires to the back of the unit and mount a battery pack there instead. A 2.5V, 500 mA cordless phone NiCad pack will work fine.

This is an old piece of equipment but it is built to quality standards that are virtually unmatched by any other electronic gear. (Disregarding the NiCad leakage problem, of course.) Agilent has the user manual and the service manuals on their web site. Other web sites, which can be located by using Google, have additional documents. The manuals are very clear (as long as you have some background in electronics) and go into great detail about how to calibrate the unit and service the entire unit down the component level. The unit has a number of built-in diagnostic functions, all of which are described in the service manuals. It is possible to do a good (although not exhaustive) evaluation by running through the tests described in the service manuals (mainly Volume 1) without using any external test equipment.

Some of the uses of this unit are:

1. Calibrate your frequency counter to within 1 Hz. -- even if you get a 3586 without the oven feature, since it can use WWV as the frequency reference, or a local radio station as the frequency reference if the local radio station is locked to the GPS timing system or some other NIST reference. (Nowadays, modern AM radio stations are on frequency within 5 Hz, and often better.)

2. Measure amplitude of signals to very precise levels at various bandwidths.

3. Act as a signal generator from 50 Hz to 32.5 Mhz.

An excellent reference that is targeted to ham radio use of the unit was written by Bill Feldmann, N6PY (SK). It can be downloaded from:

If you have any questions about this product or want to share information, please feel free to contact me directly.
WA7KGX Rating: 5/5 Jul 19, 2012 12:35 Send this review to a friend
Awesome  Time owned: 0 to 3 months
This device is an awesome fifty pounds and will wow you when it powers up with all indicators lit.

I am just learning how to program the 3586 via the GPIB interface. Only a few commands generate a response, including the TR command.

The 3586 includes a 0dbm tracking generator output that covers the range up to 32.5 mHz. If the 3586 reference is driven by an external standard, the output signal will also be precise.

Be sure to disconnect the tracking generator output when making radio measurements. Otherwise you will be measuring your cable leakage, not a real signal.
K7NG Rating: 5/5 May 1, 2012 12:45 Send this review to a friend
Great test accessory!  Time owned: more than 12 months
I should have been more detailed in my last review regarding capabilities of the 3586c.

It can measure levels to 0.1 dB, accurately.

The unit has an RF output that is exactly the same frequency as shown on the readout... in other words you have a signal source settable in fractions of a Hz! The signal output doesn't have any level control, it always comes out around 0 dBm - but it's there if you need it.

Other signals available on the rear panel:

Demodulated audio,

'Meter' jack that is a DC level proportional to the incoming signal level within the 10 dB range selected,

All versions have a 'jitter' output that measures variations in phase between the incoming signal and the display readout,

Some units bring an internal 50 MHz oscillator signal out to the back panel also, locked to the 10 MHz reference, whether internal or external,

Some units have a (Fo + 50 MHz) signal available on the rear panel also.

It is quite easy to pick off the internal 15625 Hz (that's right, 15.625 KHz) IF and bring it to a connector on the rear - there's an internal connector for it, just make or buy an appropriate jumper.

The only remote control possible is via the HP-IB port, but USB to GPIB adaptors are available.

The 3586c is a nearly-perfect vehicle for steady off-air monitoring or FMT use, plus it can be used for adjustment or monitoring your own HF equipment. I use mine for FMT - I simply adjust my readout to produce exactly a 15625.0 Hz IF signal measured via Spectrum Lab and my audio interface. I add or subtract the few millihertz variations for the finest corrections...
ERIEDXER Rating: 5/5 Mar 26, 2010 10:39 Send this review to a friend
Excellent, Versatile test receiver  Time owned: more than 12 months
This was originally built for telecomm industry. It is an extremely sensitive, selective, and stable 100 Hz to 32 MHz radio receiver and precision RF voltmeter. It can have a variety of uses for the ham on the bench for recieving purposes or for testing purposes.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.