- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Filters, RF: bandpass, duplexer, lowpass, highpass, RFI/EMI | CERAMIC FILTER - W2ENY 6KHZ AM FILTER Help

Reviews: 3 Average rating: 5.0/5 MSRP: $25
Description: After market 455Khz IF filter for the ICOM - 756 Transceive.r
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the CERAMIC FILTER - W2ENY 6KHZ AM FILTER.

WB4IUY Rating: 5/5 Mar 9, 2014 07:22 Send this review to a friend
AM Filters are back!  Time owned: 6 to 12 months
I was elated to learn that W2ENY had brought back the AM filters for the Icom IC-746 & IC-756. I work AM on 40 & 10m, sometimes 15m with my other rigs. The 9 & 15 khz filters in the 455khz I.F. are horrible on AM. I bought one of these and promptly installed it in my IC-756 standard. It is now very pleasant to listen to on AM. He has a new website at: for these filters. If you have on of these rigs, I'd recommend that you snap up one of these filters before they are gone!
N1LF Rating: 5/5 May 24, 2003 21:33 Send this review to a friend
Great Mod for AM!  Time owned: 6 to 12 months
Perhaps I got lucky, but I didn't find this
filter difficult to solder at all. Did the
mod on a Sunday morning and the entire
procedure took less than 30 minutes.

This filter is great for those who do
AM BCB DXing (though you're more than
likely using ECSS in SSB) and also
just for those who enjoy the AM nets
on 75 meters, or 160.

FM stations on 10, 6, and 2 meters still
sound fine, with no distortion. I highly
recommend this modification!

W2EH Rating: 5/5 Jun 16, 2000 12:17 Send this review to a friend
Good performance upgrade for the Icom 756 and Icom 746  Time owned: 0 to 3 months
This 455khz IF filter, with a 6khz bandwidth is a worthwhile addition for owners of the Ic-756 who still like to listen and work the AM mode. The stock Ic-756 15khz filter is too wide for HF AM mode use. Installation in the 455khz IF is not for the inexperienced amateur solderer. With 30 years of working in the microelectronics business, I can honestly say installation had it's tense moments. Removal of the 15khz filter should be done with the minimum of heat, and without much effort you can lift a copper trace or two!. This is more the result of the layout by ICOM. Just be very carefull or you will be in for some aggrivation putting the new filter on the board, have a helper assist you, and solder quickly!
The 6khz filter performed great, you will not miss the 15khz filter at all. AM stations can now be easily separated, and the noise is lower. FM stations on 10 meters and 6 meters still sound great.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.