eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna parts, accessories, incl. baluns, hardware, etc. | CWS ByteMark BAL-100 2:1 Balun Help


Reviews Summary for CWS ByteMark BAL-100 2:1 Balun
Reviews: 1 Average rating: 1.0/5 MSRP: $(missing—add MSRP)
Description: 2:1 Current Balun
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the CWS ByteMark BAL-100 2:1 Balun.

W1HEN Rating: 1/5 Jul 2, 2010 19:03 Send this review to a friend
Poor workmanship  Time owned: more than 12 months
I purchased this balun a few years ago, and it sat on the shelf until a month ago. It was put between 100 ohm balanced line and RG8. It just wouldn't tune. I ended up opening it up, and like other reviewers, found a large glob of RTV which was hiding a tack soldered SO-239. Upon removal of the RTV, the wire fell out of the connector. The SO-239 had been overheated, melting/burning the dielectric material around the center pin. Nasty stuff. The main coil is well constructed and mounted securely, but the secondary is just floating, held in place by the RTV. After replacing the connector and repairing, it still did not operate as expected. No satisfaction from the manufacturer (they offered to send me a new SO239), as it was "out of warranty". For a few dollars more, it's worth dealing with a quality manufacturer. I won't deal with CWS again.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.