eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Receivers: Vintage amateur | Hallicrafters S-38E receiver Help


Reviews Summary for Hallicrafters S-38E receiver
Reviews: 1 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: The last of the S-38 series tube driven receivers
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Hallicrafters S-38E receiver.

VK5JNL Rating: 5/5 Sep 25, 2010 02:11 Send this review to a friend
A classic receiver  Time owned: more than 12 months
The S-38E was the last in a long line of receivers designated as S-38 (B, C, D). To my mind, the E model is the best of the lot aesthetically, although the electronics did not change much in the nearly 20 years they were in production. A thing to bear in mind is that the chassis (remember those?) is LIVE, so keep your pinkies off it! Run it through an isolation transformer. My particular receiver was bought on an on-line auction site and arrived into Australia working, but only just! The case had rust and the bottom and rear masonite was missing.I stripped the rig of its capacators, and replaced them, and replaced also those resistors displaying high readings. A friend stripped the case and baked-enameled it the same colour as standard - a sort of light gray. Decals are available for the radio, as are the tubes, knobs, and bottom and rear case panels. I now have a genuine Hallicrafters S-38E which is probably in better condition than when it left the factory in the early 1960's. Performance is not up to 21st century standards, but it can still pull in DX, SSB is resolved by using the CW switch. Several versions of the E model were made, including one in a faux-wooden case, and another in a "domestic" case for use in the lounge room rather than the shack. I think that I paid about US$25 for the radio, and about twice that amount in freight! However, these are an important part of radio history and should be preserved. If you have the opportunity to acquire one, please do so even if only to pass onto your kids!
Kind regards
Norm VK5GI
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.