- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Transceivers: HF Amateur HF+6M+VHF+UHF models - not QRP <5W | Ten-Tec Triton 1 Help

Reviews Summary for Ten-Tec Triton 1
Ten-Tec Triton 1 Reviews: 2 Average rating: 4.5/5 MSRP: $519.00
Description: 80-10M SSB/CW 50W
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Ten-Tec Triton 1.

WA4THR Rating: 4/5 Aug 16, 2011 04:32 Send this review to a friend
Solid  Time owned: more than 12 months
I got this radio back in the mid '70's when it was still fairly new and I still have it. When it was manufactured it was an absolutely amazing radio and at the cutting edge of technology. I was upgrading from a National NCX-3 at the time and in comparison the Triton was all solid state, had wonderful QSK which almost nobody else had, incorporated a very good CW filter, had RIT, no-tune finals, automatic USB/LSB selection, and could even tune WWV. Relative to today's radios it still performs well, and has a quiet receiver that few PLL-based radios can match. However, it does have a slight drift...much better than the Tube type radios of the day, but noticeable in a digital environment. That's the only reason for the 4 rating in this modern comparison. This radio is still in storage in my the shack as a backup and I recently pulled it out to test it. It came right up and performed like it did when I used it to work DXCC on only 50w. Amazing.
WB0CFF Rating: 5/5 Jan 2, 2011 08:00 Send this review to a friend
Surprising  Time owned: more than 12 months
This was a botched CB conversion that I bought as a tech special on an on-line auction site. It was very easy to work on and restore to full use. The finals were blown thanks to some weird mods. I backed out the mods and with some advice from the service guys at Ten Tec, I purchased a pair of finals from RF parts and got back it back on the air. Given the age and the technology of the time, I have been pleasantly surprised by this rig.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.