eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Ham radio kits | Vectronics (MFJ) VEC-102k Shortwave Radio Kit Help


Reviews Summary for Vectronics (MFJ) VEC-102k Shortwave Radio Kit
Reviews: 1 Average rating: 4.0/5 MSRP: $$79.95
Description: Shortwave Regenerative Receiver Kit East to build
Product is in production.
More info: http://MFJ.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Vectronics (MFJ) VEC-102k Shortwave Radio Kit.

KG6QNK Rating: 4/5 May 21, 2011 14:46 Send this review to a friend
Fun, Educational, Easy to build Kit  Time owned: months
This was the first project I built when I got back into Radio. Finished project in it's enclosure has a substantial look and feel about it; however the actual circuit is quite simple. Components are spread out on the circuit board, in order to prevent coupling, or so I assume. Regenerative Receiver requires the use of two controls that interreact with one another to properly tune the unit. Once you get used to it, it is a lot of fun. Good quality components, especially the vernier ball bearing air variable main tuning capacitor. Only one Toroid Coil to wind, it's very easy- good experience if you have never done this before. Manual is quite good with: building instructions and operating suggestions. Will work with simple length of wire strung out as an antenna. Tuning Knob frequency indicator is very coarse and aproximate, I don't even use it...just an extra piece of plastic that flops around. Come to think of it, should get accurate frequency readout by placing unit next to Radio with digital readout. I did not find the Frequency display or lack of it problematic...the "only" $79.95? price tag is...it is overpriced, in my opinion. Seems to me, MFJ could reconsider some of their price-points and make more profit by selling more units cheaper- win win situation. Many would consider this a "Novelty" Receiver; fair enough, nonetheless it is fun to use and build. Inspite of hefty price tag good project for beginning builders. If you can solder and follow the instructions, you will most likely be rewarded with a Radio you will have fun with for years to come. Regenerative Receivers are not single signal reception...I did not find this problematic and there are strategeries that can be used to minimize this. Except for the price I can recommend this kit. Ten tec has a couple Regenerative Receiver kits for consideration and schematics are available for various "Gennies" online. Cheers.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.