eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Receivers: General Coverage | QuickSilver QS1R Help

Show all reviews of the QuickSilver QS1R

You can write your own review of the QuickSilver QS1R.

AKREIDER  Rating: 5/5 Feb 24, 2013 23:39  Send this review to a friend!
Amazing Radio  Time owned: 3 to 6 months
I recently got back into shortwave radio after staying away due to the horrible urban RFI situation. I previously used a Drake R8 original. That was a great radio, but having a software defined radio is a vastly different experience.

The SDRMAX V software is amazing. It has a couple quirks, and it takes a while to switch from using dials for everything -- but the ability to view up to 2 Mhz spectrum and the selectivity makes it all worthwhile! The one improvement I most want to see is a better spectrum playback. Currently you can record and re-tune the radio. However you cannot jump ahead or back to a time in the recording. This makes reviewing a long recording very difficult.

The selectivity is superb. I don't know the specifications but it crushes the Drake. The synchronous AM outperforms the Drake (which had locking issues). You can vary the bandwidth in each mode to the nearest 1 Hz.

The noise reduction provides marginal improvements on weak signals. It is not a miracle. It also makes it easier to listen to signals that have moderate noise.

The two noise blankers are useful. NB2 is effective on power line noise. I can hear WWV on 60 khz thanks to NB2. They are quirky. At some settings, signals bleed all over.

I don't like the auto-notch filter as it appears to be too wide or too deep. However in practice, I never need it because you can avoid the heterodynes by using tight filters and USB/LSB. The manual notches work great and you can have up to ten.

The graphical display is very useful to find stations. For instance, it is easy to see Transatlantic MW carriers. It is also useful for determining what filter size to use, and for peaking or nulling a signal.

The documentation is limited. However there is support via a YahooGroups.

If you live in a city, you may see a weak image of FM stations around 30-35 Mhz (probably the 55 mhz low-pass filter is not strong enough). There are also several spurious signals that appear as multiples of the spectrum width that you are viewing - however they can be eliminated by changing that width. 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager