- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

donate to eham
Categories | Receive Accessories | MFJ 1026 Noise & Interference Canceler Help

Show all reviews of the MFJ 1026 Noise & Interference Canceler

You can write your own review of the MFJ 1026 Noise & Interference Canceler.

ZS5J  Rating: 4/5 Mar 29, 2013 15:37  Send this review to a friend!
Does the job  Time owned: 0 to 3 months
I bought this through DXEngineering, to resolve some interference issues I have been getting from a neighbours battery charger. Firstly, if you want to instal the telescopic whip don't try to fit it with the top cover on, you will strip the threads. Take the cover off, fit the antenna and then put the cover back on - typical MFJ engineering...the hole on the top of the cabinet does not line up properly. Even after fitting the whip and replacing the cover, it sits very tightly against the edge of the hole in the cover.

Don't use the whip antenna unless the interference you are getting is right in your shack, or very close by in your house. It is useless for anything else. You need a really good antenna outside to really make this unit work well - the pickup antenna needs to be hearing the interference as good as your main antenna, or as close to it as possible.

With a bit of tweaking, and trying different noise antennas, I got it to work reasonably well - it knocked S 9+ noise down to S 4. There is a little room for improvement with my setup, so I plan on improving my noise antenna, to make it even more effective.

Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager