- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Categories | Antennas: HF: Vertical, Wire, Loop | Pixel RF PRO-1A & 1B Shortwave Magnetic Loop Antenna Help

Show all reviews of the Pixel RF PRO-1A & 1B Shortwave Magnetic Loop Antenna

You can write your own review of the Pixel RF PRO-1A & 1B Shortwave Magnetic Loop Antenna.

JRT3  Rating: 5/5 May 2, 2013 07:05  Send this review to a friend!
Still great!  Time owned: more than 12 months
My Pro-1a is still working fine after over two years of use. It weathered a near-miss by an F4 tornado 1/12 quite well, too, although the same can't be said for my neighbors (I lost a couple of shingles, wind chimes, tree branches, and power - I was blessed!). I didn't have a 12V power inserter, so I was unable to use my back-up battery during that and subsequent power outages. Doug at Pixel did tell me the amp would work on 12V and that they have such a power inserter.

It still nulls the house generated QRM quite well, while additional powerline work resulted in more 'sources'. You have to null the worst offender - it cannot get them all! I am still pleased with my purchase - and I am considering upgrading my loop to the Pro-1b (The pre-amps are similar.). It's just hard to replace something that works as well - and has weathered quite well, too.

Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager