eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Antennas: HF: Vertical, Wire, Loop | Butternut HF9V Help

Show all reviews of the Butternut HF9V

You can write your own review of the Butternut HF9V.

W4VKU  Rating: 5/5 Aug 17, 2013 21:57  Send this review to a friend!
Fantastic performer with excellent ground  Time owned: more than 12 months
First of all, i own 2 butternuts. They are HF9V and HF9V-X. Do not try to do elevated radials on this multiband antenna. It is an exercise in frustration. It will work so so with a so so ground.

However, i installed it right in the salt water at 8Q7 and it was a killer antenna. 40m LSB was like radio telephone everyday at grayline with 400w. It fared comprable with a 2 element steppir on 17m, polar path.

Putting it together takes time,since one needs to
apply the conductive grease. Use surgical gloves
when you put it together and tune it, to avoid
the mess in your hands.

Tuning is a pain i agree. Start with 80m and then
go higher. I did not care to get 10m to play.
However, 80m thru 12m was good. I run 200ft of
LMR 400 and that helped smooth out the high SWR.

Also tear down for shipping is not easy. One needs to be meticulous in removing and packing.
I broke the 30m doorknob cap due to shipping stress. Not a fault of the antenna, but careful
packing is the key.

They are good performers, but under the best
conditions. The antenna did not do to well on a
sandy beach, with the 6 radials on the sand. It
did pretty good on 20m, but not on 40m . So it
is ideal if placed in a perfectly conductive
ground. But for that matter, any vertical will
work well in that situation.

But, without any autotuner, not worrying about
carrying control cables etc, this is an excellent
solution.

The HF6V going is around $150 for a good used one
these days.

I will use it again for future expeditions in a
phasing setup and if you have a HF6V-X to sell
at a reasonable price, pse drop me a note :)

Good luck & 73s
Krish
w4vku 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager