- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Categories | Transceivers: HF Amateur HF+6M+VHF+UHF models - not QRP <5W | Apache ANAN-100 Help

Show all reviews of the Apache ANAN-100

You can write your own review of the Apache ANAN-100.

ZL3DW  Rating: 5/5 Nov 22, 2013 02:03  Send this review to a friend!
Good build quality, excellent performance, works as advertised  Time owned: 3 to 6 months
The ANAN-100 (not the D model) is based on the Hermes SDR board and Alex filters developed by the Open HPSDR group plus a 100W PA developed by Apache. It works very well and its technical performance lab tests report is very good as well. I get at least -130dB MDS sensitivity, the limit of my signal generator. Build quality is excellent, sales support was good, technical support has not been required so no comment on that. Compatible with PowerSDR mRX, cuSDR (Rx), Hetrodyne, and Kiss Konsole open source free software. Also Studio 1 (Rx). I only have a slow dual core PC, but can use up to five 384kHz receiver slices including waterfall display and a full spectrum display to 66MHz. HF +6m. (A better PC allows 7 slices). Everything works and it is a nice step up from my old Flex-1500 which worked well too. Familiar PowerSDR software. Very happy so far. Real rating 4.5 because the fan is a little noisy and mic jumpers are a real pain to change. Used it in CQWW contest and it did not miss a beat. 
Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager