eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Amplifiers: RF Power - HF & HF+6M | Ameritron AL-811 Help

Show all reviews of the Ameritron AL-811

You can write your own review of the Ameritron AL-811.

K5RCR  Rating: 5/5 Jan 17, 2014 20:39  Send this review to a friend!
5 years, 1 set of tubes, still going strong  Time owned: more than 12 months
I bought this AL811 new direct from Ameritron in 2008. Upon removing the cover, I found the amplifier to be well constructed, no funny solder joints, etc. I just recently changed tubes as the original 5 year old set was getting soft - output down to 300 watts at max [150 ma] grid current. I initially replaced the 811a's with Chinese 572b's direct from China...big mistake. They were a matched set alright...every damned one arced! Of course, this caused the fuses and the D16 meter diode to blow. Anyway, after replacing the fuses and the diode I put in 3 derated 572b's [Taylor 811H - rated for 1900V as opposed to 2700V] from RF Parts. While these tubes are still Chinese, at least RF Parts tests the buggers. The amp is back in the rack and works great - several Eastern European stations worked easily on 160 and 80 meters using 400 watts just a few minutes after putting the amp back in service. Great little amp. Easy to work on and even the "tough" tubes are cheap.  
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager