- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Categories | Antennas: VHF/UHF+ Directional (Yagi, quad, etc.) | PAR Electronics SM-50 6M Stressed Moxon Help

Show all reviews of the PAR Electronics SM-50 6M Stressed Moxon

You can write your own review of the PAR Electronics SM-50 6M Stressed Moxon.

K8NS  Rating: 5/5 Jul 16, 2014 14:52  Send this review to a friend!
good performance  Time owned: 0 to 3 months
I have had this antenna 1 week. I previously used a Par OA-50 Omni directional loop (and still do) which I was very satisfied with but wanted to try the Moxon. It took 8 days from the time I mailed Par the check, until I received the antenna. Assembly and tuning took about 20 minutes. Installation on mast with rotor, 10ft above my existing TV antenna, took another 1 1/2 hours. Antenna is at 27ft. SWR did not change (1:1) and I am not experiencing any TVI. Performance on receive shows most signals 1 to 1 1/2 S units stronger than the OA-50 which is at 22ft. This is quite noticeable on the beacons. Front to back/side ratio is very noticeable. The compactness and lite weight of this antenna has allowed me an increase in performance at a reasonable overall cost. My first qso with the antenna was NP4CW 599 both ways. Par was very helpful to me; answering all my questions by email, and explaining both theory of operation and fabrication details. I am a happy camper.  
Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager