eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Microphones | Kenwood MC-80 Help

Show all reviews of the Kenwood MC-80

You can write your own review of the Kenwood MC-80.

HA7WX  Rating: 4/5 Aug 15, 2014 06:32  Send this review to a friend!
Goog Mic after a little mod  Time owned: more than 12 months
I have had this microphone as a combo with my TS-870 back then when i bought it used.
This mike is very good especially on the used market, so if you're on a budget, this one will fit the bill between 50 and 60 euros depending on its condition.
One mod is necessary and it won't ruin the microphone's aesthetics: you carefully need to unscrew the small grid on the goose neck to have access to the electret mic element. Take care not to scratch your mike.
Gently pull it outside with tweezers by 1/4 inch just enough to stick transparent tape, so that you insulate it electrically from the goose neck and the rest of the mike. Push it back in place and carefully screw back the grid.
This is the easy and sure way to cure the mike against RFI.
Otherwise this microphone has a flat response and a little on the lower medium side, so it's a bit boring and not punchy.
Would i recommend it? Yes to the HAM on a budget and who wants a pretty decent mic with clear modulation to replace the hand-mic of his Kenwood rig.
 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager